ProForm 2400 warranty See the inset drawing. Tie the wire tie

2. Pull the Upright Wire (88) and the Base Ground	2
Wire (100) through the indicated hole in the
Base (105).
Attach the Base Ground Wire (100) to the Base
(105) with a #8 x 1/2" Ground Screw (10).
Press the Grommet (101) into the square hole in
the Base (105).		Hole	101
		88
		10	100		105
3. Identify the Left Upright (90), which is marked	3
“Left.” Have a second person hold the Left		88	90
Upright near the Base (105).
See the inset drawing. Tie the wire tie in the
Left Upright (90) securely around the end of the					Wire
Upright Wire (88). Then, pull the other end of the						88
wire tie until the Upright Wire is routed through					Tie
the Left Upright.			Wire
			Tie
		90
			88	105
	8