ProForm 2400 warranty Symptom The iFit Live mode does not function correctly

Page 31

Lower the treadmill (see HOW TO LOWER THE TREADMILL FOR USE on page 29). Remove the three #8 x 3/4" Screws (2). Carefully pivot the Motor Hood (72) off.

72 2

Locate the Reed Switch (59) and the Magnet (58) on the left side of the Pulley (61). Turn the Pulley until the Magnet is aligned with the Reed Switch.

Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). If necessary, loosen the #8 x 3/4" Tek Screw (16), move the Reed Switch slightly, and then retighten the Screw. Reattach the Motor Hood (not shown) with the five #8 x 3/4" Screws (not shown) and run the treadmill for a few minutes to check for a cor- rect speed reading.

Top

 

View

 

1/8 in.

58

59

16

61

 

SYMPTOM: The incline of the treadmill does not change correctly

a.Recalibrate the incline system (see step 3 on page 27).

SYMPTOM: The iFit Live mode does not function correctly

a.If the iFit Live mode is not functioning correctly, make sure that the treadmill has the most current firmware available (see step 7 on page 28).

SYMPTOM: The walking belt slows when walked on

a.

Use only a single-outlet surge suppressor that

b.

meets all of the specifications described on page 16.

If the walking belt is overtightened, treadmill perfor-

 

mance may decrease and the walking belt may be-

 

come damaged. Remove the key and UNPLUG

 

THE POWER CORD. Using the hex key, turn both

 

idler roller screws counterclockwise, 1/4 of a turn.

 

When the walking belt is properly tightened, you

 

should be able to lift each edge of the walking belt

 

2 to 3 in. (5 to 7 cm) off the walking platform. Be

 

careful to keep the walking belt centered. Then,

 

plug in the power cord, insert the key, and run the

 

treadmill for a few minutes. Repeat until the walk-

 

ing belt is properly tightened.

 

b

 

2–3 in.

 

Idler Roller Screws

c.

If the walking belt still slows when walked on, see

 

the front cover of this manual.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents On the WEB QUESTIONS?Model No. PFTL14011.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Instructions Save TheseBefore YOU Begin Part Identification Chart Assembly See the inset drawing. Tie the wire tie Base Covers into place yet Be careful not to pinch the wires. IfFully tighten the Screws yet. Note It may be Attach the Right Upright not shownScrews and Star Washers will be used Step Sembly. They will be used in step Start all four Screws, and then tighten themPulse Wires Console Pulse Bar Assembly Tie Shown. Start all four Screws, and then Tighten them Page Chest Heart Rate Monitor HOW to PUT on the Heart Rate MonitorCare and Maintenance TroubleshootingHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the Console Insert the key into the console HOW to Turn on the PowerPulled from the console, causing HOW to USE the Manual ModePage Measure your heart rate if desired Start the workout HOW to USE a SET-A-GOAL WorkoutStart the workout Monitor your progress COOL-DOWN Mode HOW to USE the Ifit Live ModeConnect your treadmill to your own wireless network Select the iFit Live mode2b. Connect your treadmill to an encrypted wireless network HOW to USE the Settings ModeSelect the settings mode Select the wireless network modeExit the settings mode Change the international settingsLog in to your iFit Live account Perform a network test HOW to USE the Maintenance ModeView technical information Exit the maintenance modeHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillSymptom The power turns off during use TroubleshootingSymptom The walking belt slows when walked on Symptom The iFit Live mode does not function correctlyPage Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Part ListQty DescriptionQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT

2400 specifications

The ProForm 2400 is a state-of-the-art treadmill designed for fitness enthusiasts looking to achieve their workout goals efficiently. This treadmill amalgamates advanced technology, durability, and user-friendly features, making it an ideal choice for home workouts.

One of the standout features of the ProForm 2400 is its impressive motor. Equipped with a powerful 3.5 CHP Mach Z motor, it provides a smooth and consistent performance, making it suitable for both walking and high-intensity running. This motor ensures that users can enjoy their workouts without distractions, maintaining a steady pace even during demanding sessions.

The ProForm 2400 also boasts a spacious running surface, featuring a 20-inch by 60-inch belt. This generous size accommodates runners of all strides, offering ample space for comfort and safety. Furthermore, the machine is designed with an adjustable cushioning system, which helps to reduce impact on joints, minimizing the risk of injury while enhancing the overall running experience.

In terms of technology, the ProForm 2400 comes equipped with a full-color touchscreen display. This intuitive interface allows users to easily navigate through workout programs, track their progress, and manage their settings. The built-in iFit technology offers a vast library of interactive workouts led by professional trainers, which can be adjusted to meet individual fitness levels. Users can also compete in races, simulate outdoor terrain, and explore various workout challenges from the comfort of their homes.

Another significant aspect of the ProForm 2400 is its connectivity options. The treadmill seamlessly integrates with Bluetooth, enabling users to pair it with their smartphones or tablets. This feature allows for the syncing of fitness apps, music, and tracking devices, enhancing the overall workout experience. Additionally, built-in speakers provide an opportunity to enjoy music or virtual coaching during workouts.

The ProForm 2400 also emphasizes convenience with its easy-to-fold design. With a simple lift-and-latch mechanism, users can effortlessly fold the treadmill for storage when not in use. This feature is particularly beneficial for those with limited space, allowing them to maximize their area without sacrificing workout quality.

In summary, the ProForm 2400 is a meticulously designed treadmill that caters to a wide range of fitness needs. Its powerful motor, spacious running surface, cushioning system, modern technology, and convenient storage options make it an excellent investment for anyone serious about their fitness journey. Whether you're a beginner or a seasoned athlete, the ProForm 2400 is engineered to help you reach your goals effectively.
Top Page Image Contents