5. Measure your heart rate if desired.
If your heart rate is not shown, make sure that your hands are positioned as described. Be careful not
If there are sheets of clear plastic on the metal contacts on the handgrip pulse sen- sor, remove the plas- tic. To measure your heart rate, hold the handgrip pulse sensor with your palms resting against the metal con- tacts. Avoid moving your hands or grip- ping the contacts tightly.
Metal |
Contacts |
to move your hands excessively or to squeeze the metal contacts tightly. For optimal performance, clean the metal contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts.
6. When you are finished exercising, the console |
will turn off automatically. |
If the pedals do not move for several seconds, a |
series of tones will sound, the console will pause, |
and the time will flash in the display. |
If the pedals do not move for about five minutes, |
When your pulse is detected, a heart- shaped symbol will flash in the left display. Each time your heart
beats, one or two
dashes will appear, and then your heart rate will be shown. For the most accurate heart rate read- ing, hold the contacts for at least 15 seconds. Note: If you continue to hold the handgrip pulse sensor, the display will show your heart rate for up to 30 seconds.
the console will turn off and the display will be |
reset. |
17