ProForm 831.23745.1 user manual

Page 6

	1.
		To make assembly easier, read the		1

		information on page 5 before you begin.

While a second person tips the Frame (2) backward, attach a Wheel (25) to each side of the Frame with an M10 X 35mm Shoulder Patch Screw (94).

	2
		25
		94
2. Carefully tip the Frame (2) onto its side. Orient	2
the Base (1) as shown, and then insert the Base	2
the Base (1) as shown, and then insert the Base
into the Frame. Attach the Base with two M10 x
62mm Patch Bolts (97), two M10 Spacers (76),
two M10 x 48mm Patch Screws (78), and two
M10 Split Washers (72).
Then, carefully tip the elliptical exerciser to an
upright position.
	2
	1	76
		76
	72
	78	97

6

Image 6

Contents Model No Serial No Sears, Roebuck and Co., Hoffman Estates, ILTable of Contents Important Precautions Before YOU Begin Assembly Page Grease Repeat this step for the other side Elliptical exerciserStart all screws before tightening any Patch Screws 95. Avoid pinching the WireWire Harness Avoid pinchingRepeat this step for the Left Handlebar not shown Other electronic components may become Avoid pinching the Wire Harness 48 during this step HOW to USE the Elliptical Exerciser HOW to Move the Elliptical ExerciserHOW to Exercise on the Elliptical Exerciser Page Console Diagram Features of the ConsoleHOW to USE the Manual Mode Select the manual modeBegin pedaling to turn on the console When you are finished exercising, the console Measure your heart rate if desiredWill turn off automatically HOW to USE a Weight Loss Workout Press Start or begin pedaling to start the workoutHOW to USE a Preset Workout HOW to View the Fitness JournalHOW to Adjust the Reed Switch Maintenance and TroubleshootingBattery Replacement HOW to Adjust the Drive BeltWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R0108A Qty DescriptionQty Description Exploded Drawing A-Model No Exploded Exploded ONE Year Full Warranty Get it fixed, at your home or ours