Assembly

To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires a phillips screwdriver		, two adjustable wrenches	, and a rubber
mallet	.

See the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 14. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not found in the parts bag, check to see if it has been preassembled.

M6 Washer	M6 Arc	M8 Washer	M8 Arc	Wave Washer
(55)–2	Washer (39)–4	(52)–4	Washer (54)–8	(50)–2
Console	M6 x 5/8” Pocket	M6 Nylon	M8 Nylon	M8 Cap Nut
Screw (68)–4	Screw (46)–4	Locknut (56)–6	Locknut (57)–4	(24)–2
M8 x 5/8” Hex	M8 x 3/4” Hex		M8 x 1 9/16” Hex Bolt (41)–4
Bolt (45)–6		Bolt (26)–2
	M8 x 2 1/2” Hex		M8 x 3 3/8” Hex Bolt (42)–2
	Bolt (40)–2		M8 x 3 3/8” Hex Bolt (42)–2
	Bolt (40)–2
		M8 x 3 1/2” Carriage Bolt (51)–2
		4