1.Identify the Front Stabilizer (2), which has Transport Wheels (29) attached to it. Attach the Front Stabilizer to the Frame (1) with two M8 x 3 1/2” Carriage Bolts (51), two M8 Arc Washers (54), and two M8 Cap Nuts (24).
2.Tip the Frame (1) up onto its front end as shown. While another person holds the Frame, attach the Rear Stabilizer (20) to the Frame with two M8 x 3 3/8” Hex Bolts (42).
With the help of another person, tip the Frame (1) back down so that it is resting on the Rear and Front Stabilizers (2, 20).
3.The Console (22) requires three “AA” batteries; alka- line batteries are recommended. Insert three batteries into the Console; make sure that the batteries are oriented as shown by the markings inside of the Console.
1 | 29 | |
| ||
| 51 | |
54 | 29 | |
24 | ||
| ||
| 2 | |
| 54 | |
1 | 24 | |
2 | 20 | |
| ||
42 |
| |
| 1 | |
| 2 | |
3 |
| |
| Batteries | |
22 |
|
5