ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack- ing materials. Do not dispose of the packing materials until assembly is compTeted.
In addition to the included | allen wrenches, assembly | requires | a phillips screwdriver _, | an |
adjustable wrench _:_::_, | and a rubber mallet | C |
| |
|
|
| L_J |
|
As you assemble the exercise cycle, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page
14.The second number refers to the quantity used in assembly. Note: Some small parts may have been pre- assembled for shipping. If a part is not in the parts bag, check to see if it has been
M4x | 16mm | M6 x 16mm | M6 Flat | M10 Split | MIO Nylon |
Screw | Screw | Washer | Washer | Locknut | |
|
|
|
|
| D |
| M6 x 53mm |
| M10 x 66mm Button Bolt | ||
| Screw |
|
|
|
MIO x 52mm Button Bolt | MIO x 75mm Carriage Bolt |
MIO x 80mm Button Bolt (49)-2
4