Speed, time, distance or
calorie modeÑ To select one
of these
modes for con- tinuous display,
press the
mode button repeatedly. The mode indicators will show which mode is selected. Make sure that the scan mode is not selected.
3.To reset the display, press the on/reset button.
4.To turn off the power, simply wait for about four min- utes. Note: The monitor has an
NOTE: Your console displays speed in either miles per hour (mph) or revolutions per minute (rpm). If the displayed speed has a decimal point, your console displays speed in miles per hour; if the displayed speed does not have a decimal point, your console displays speed in revolutions per minute. Use the chart below to convert one unit of measurement to the other, if desired
If your console displays speed in miles per hour, it displays distance in miles. If your console displays speed in revolutions per minute, it displays distance in total revolutions (revs). Use the chart below to convert one unit of measurement to the other, if desired.
STORAGE AND TROUBLE-SHOOTING
Inspect and tighten all parts of the exercise cycle regularly. Replace any worn parts immediately.
HOW TO STORE THE EXERCISE CYCLE
The exercise cycle can be cleaned with a soft, damp cloth. Avoid spilling liquid on the console. Keep the console out of direct sunlight or the display may be damaged. Remove the batteries when storing the exercise cycle.
BATTERY REPLACEMENT
If the console does not function properly, the batteries should be replaced. See assembly step 5 on page 5. In addition, make sure that the console wire is con- nected to the reed switch wire.
When the exercise cycle is not in use, it can be folded for compact storage.
Remove the Spring Clip (52) and then pull out the ÒLÓ Pin (56). Next, fold the exercise cycle by bringing the seat and handlebars toward one anoth- er. Store the exer- cise cycle indoors, away from mois- ture and dust.
52
56
7