17.Attach a Front Upright (43) to the Right Rack Base (38) with two M10 x 82mm Bolts (85), two M10 Washers (80), and an M10 Nylon Locknut (77). Do not tighten the Bolts.
Attach the Front Upright (43) to the right Guide Rod (46) with an M10 x 25mm Bolt (88).
Repeat this step with the other Front Upright (not shown).
18.Attach the Cross Frame (44) to the right Front Upright (43) with two M10 x 82mm Bolts (85), two M10 Washers (80), and an M10 Nylon Locknut
(77).Do not tighten the Bolts.
Repeat this step with the left Front Upright (not shown).
19.Attach the Top Frame (45) to the Rear Upright
(41)with two M10 x 67mm Bolts (86), four M10 Washers (80), and two M10 Nylon Locknuts (77).
Do not tighten the Locknuts.
Attach the Top Frame (45) to the Cross Frame
(44)with two M10 x 78mm Bolts (87), two M10 Washers (80), and two M10 Nylon Locknuts (77).
Do not tighten the Locknuts.
17 |
| 88 |
|
| |
|
| 46 |
| 43 |
|
|
| 77 |
| 80 |
|
|
| 38 |
85 |
|
|
18 |
|
|
85 | 80 |
|
|
| |
80 |
| 44 |
|
| |
43 | 77 |
|
19 |
|
|
87 |
|
|
| 45 | 77 |
|
| |
|
| 80 |
|
| 80 |
| 86 | 80 |
| 44 | |
| 41 | |
|
| |
80 |
|
|
77 |
|
|
11