ProForm PFANBE3525.0 user manual

Page 6

2.Attach the Bench Foot (15) to the Seat Base (1) with two M4 x 16mm Self-tapping Screws (91) and two M4 Washers (84).

3.Insert two M10 x 100mm Screws (26) up through the Base Plate (34), and the Seat Base (1), and the Right and Left Seat Bases (2, 3).

Attach the Right and Left Seat Bases (2, 3) to the Seat Base (1) with two M10 x 58mm Button Bolts (95) and two M10 Nylon Locknuts (77).

4.Attach the Seat Frame (5) to the Seat Base (1) with the indicated two M10 x 100mm Screws (26).

2
15	1
84
84
91
3
2
95
1
	3
34	77
26
4
5
	26
1	26
1

6

Image 6

Contents QUESTIONS? Model No. PFANBE3525.0 Serial NoTable of Contents Important Precautions Before YOU Begin Right SideLeft Side Assembly Make Things Easier for YourselfPage Page Page Repeat this step with the Right Rack Base LocknutsLocknut the Stop Hook must be able to pivot easily Repeat this step with the left Guide Rod not shownRepeat this step with the other Front Upright not shown Do not tighten the LocknutsMake sure that the Barbell is centered Page Adjustments Adjusting the BackrestAttaching the Curl PAD Attaching the Barbell Adapter Attaching AccessoriesAdding Weight BarbellAdjusting the Barbell Stops Using the BarbellAdjusting the Cable Cable Diagram Exercise Guidelines Muscle Chart Cooling DownStaying Motivated Part Identification Chart Part LIST-Model No. PFANBE3525.0 Key No. Qty DescriptionExploded DRAWING-Model No. PFANBE3525.0 R0406A 8382 Ordering Replacement Parts