8.Hold the Rear Stabilizer (3) under the Carriage Bar
(7)in the position shown. Attach the Rear Stabilizer to the Carriage Bar with three M8 x 100mm Button Screws (63) and three M8 Washers (55).
9.Insert the lower end of the Backrest Frame (8) into the Seat Frame (27). Attach the Seat Frame and the Backrest Frame to the Seat Carriage (11) with four M8 x 38mm Button Screws (24).
10.Slide a Seat Handle (61) onto one side of the Backrest Frame (8). Attach the Seat Handle with two M6 x 38mm Button Bolts (14) and two M6 Nylon Locknuts (15).
Attach the other Seat Handle (not shown) to the other side of the Backrest Frame (8).
11.Attach the Seat (12) to the Seat Frame (27) with four M6 x 22mm Button Screws (29) and four M8 Washers (55).
8 | 63 | |
63 | ||
| ||
55 |
| |
| 55 | |
7 |
| |
| 3 | |
9 |
| |
24 |
| |
27 | 24 | |
| ||
| 8 | |
11 |
| |
10 |
| |
| 8 | |
15 |
| |
| 14 | |
61 |
| |
11 |
| |
12 |
| |
| 27 | |
| 55 | |
| 29 |
7