9.Insert the Track (2) into the Frame (1). Attach the Track with two M8 x 50mm Patch Screws (65), two M8 x 16mm Patch Screws (53), and two M8 x 25mm Washers (54).
10.Identify the Right Link Arm (39) and the Right Pedal Leg (38), which are marked with “R” stick- ers, and orient them as shown.
Apply a generous amount of grease to a Link Axle (47). Also, apply a small amount of grease to a 16mm Wave Washer (66). Slide the Link Axle through the Right Link Arm (39) and then slide the Wave Washer onto the right side of the Link Axle.
With the help of another person, slide the Right Pedal Leg (38) onto the right side of the Link Axle (47). Attach the Right Link Arm (39) and the Right Pedal Leg with two M8 x 25mm Patch Screws (77), two Link Axle Covers (49), and two M8 x 25mm Washers (54).
Repeat this step for the Left Link Arm and the Left Pedal Leg (not shown).
9 |
|
|
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
|
|
| 54 |
|
|
| 2 | 65 | 53 | |
10 |
|
|
|
|
|
|
77 | 49 | 39 | Grease |
|
|
|
| 54 | 66 | 47 |
|
|
|
|
|
|
|
|
| |
|
|
|
| 38 | 54 | 49 77 |
10