ProForm PFEL95918.0 manual Attach the other Wheel not shown in the same way

Page 6

1.To make assembly easier,read the information on page 5 before you begin assembling the ellipticalexerciser.

Attach a Wheel (8) to one side of the Frame (1) with an M10 x 35mm Shoulder Screw (57).

Attach the other Wheel (not shown) in the same way.

2.Apply a generous amount of the included grease to the Pivot Axle (41). Then, insert the Pivot Axle through the Frame (1).

Apply a small amount of grease to a 16mm Wave Washer (66). Slide the Wave Washer onto the right side of the Pivot Axle (41).

Identify the Right Upper Body Arm (37), which is marked with an “R” sticker. Make sure that the ends of the Right Extension Wire (83) are oriented as shown.

Slide the Right Upper Body Arm (37) onto the Pivot Axle (41). Then, insert the end of the Right Extension Wire (83) upward through the Frame (1).

Tip: Avoid pinching the Right Extension Wire (83) during this step. Attach the Right Upper Body Arm (37) with an M8 x 25mm Patch Screw (77), a Pivot Axle Cover (44), and an M8 x 25mm Washer (54).

Attach the Left Upper Body Arm (23) in the same way.

Tip: Use an elastic band or a piece of tape to prevent the ends of the Wire Harness (73) and the Right and Left Extension Wires (83, not shown) from falling into the Frame (1).

1
1	8
	8
	57

2		Avoid pinching the
83		Avoid pinching the
83		wires during this step
73	1
	1
	41	83	83
23		83
23	Grease 66			54
	Grease 66			54	44
			37		77

6

Image 6

Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. PFEL95918.0 Serial No On the WEBTable of Contents Important Precautions Before YOU Begin Assembly Attach the other Wheel not shown in the same way Avoid pinching Wires during this step Attach the Left Handlebar 22 in the same wayWires during Avoid pinchingThis step Avoid pinching Wires during This step Grease Page HOW to USE the Elliptical Exerciser HOW to Level the Elliptical ExerciserHOW to Exercise on the Elliptical Exerciser Console Diagram Features of the Console HOW to USE the Manual Mode Select the manual mode. Each time you turnChange the resistance of the pedals as desired Select a cross trainer program HOW to USE a Cross Trainer ProgramTurn on the fan if desired Begin pedaling to start the programSee on HOW to USE a Smart Program Select a smart programBegin pedaling to turn on the console HOW to USE a Heart Rate ProgramEnter a target heart rate setting. When you select a Select a heart rate programHOW to Play the FAT Blocker Game Select the Fat Blocker gamePedal to start the game HOW to Play the Calorie Destroyer Game Select the Calorie Destroyer gameFollow your progress with the display HOW to USE the Sound System HOW to Adjust the Reed Switch Maintenance and TroubleshootingHOW to Adjust the Drive Belt Console TroubleshootingWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. PFEL95918.0 Qty DescriptionExploded Drawing A-Model No. PFEL95918.0 R0808A Exploded Drawing Model Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT