Assembly, Wrench A rubber mallet | ProForm PFEL6026.0 manual

ProForm PFEL6026.0 Assembly, Included hex keys, assembly requires a phillips screwdriver

Page 5

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the

included hex keys, assembly requires a phillips screwdriver			, an adjustable
wrench	, and a rubber mallet	.

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 20 and 21. The number follow- ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-assem- bled. If a part is not in the parts bag, check to see if it has been pre-assembled.

Star Washer	M8 Split	Wave Washer	M8 Washer	M8 Jamnut	M8 x 15mm Button
(112)–8	Washer (90)–3	(111)–2	(88)–6	(79)–5	Screw (116)–8

	M4 x 16mm	M4 x 32mm		M6 x 20mm Button
M4 x 14mm	Round Head	Round Head	M4 x 45mm	M6 x 20mm Button
Screw (104)–8	Screw (101)–14	Screw (105)–6	Screw (108)–2	Screw (77)–4

Hub Screw (87)–8	M8 x 23mm Shoulder	M8 x 23mm Button	M8 x 41mm Button
	Screw (115)–4	Screw (84)–4	Bolt (78)–4

M8 x 69mm Button	M10 x 82mm Button
Bolt (80)–1	Screw (82)–2

M10 x 127mm Button Screw (83)–2

Image 5

Contents

ProForm PFEL6026.0 Assembly, Included hex keys, assembly requires a phillips screwdriver

ASSEMBLY

included hex keys, assembly requires a phillips screwdriver

wrench

, and a rubber mallet