ProForm PFEL57907.0 user manual Repeat this step to attach the other Pedal

Page 9

7.Insert the axle of the Roller (27) through the right Link Arm (25); make sure that the Roller is on the inner side of the Link Arm. Attach the Roller with an M10 x 15mm Patch Screw (71) and an M10 x 22mm x 1.5mm Washer (63).

Tip: Use a wrench to hold the axle of the Roller firmly in place while you tighten the Patch Screw into the axle.

Repeat this step to attach the other Roller (27) to the left Link Arm (25).

8.Orient a Pedal (26) as shown. Attach the Pedal to the bracket on the Left Pedal Leg (24) with two M8 x 55mm Patch Bolts (61) and two M8 Hex Nylon Locknuts (77).

Repeat this step to attach the other Pedal (26).

7
25
27
	25
63	71
8
26
61
24	77
24
26

9

Image 9

Contents QUESTIONS? Model No. PFEL57907.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Before YOU Begin Assembly Repeat this step to attach the Left Handlebar M10 x 120mm Patch ScrewsAvoid pinching Wires during this stepIdentify and orient the Ramp 2 as shown Repeat this step to attach the other Pedal Page Page HOW to Plug in the Power Supply HOW to USE the Elliptical ExerciserHOW to Move the Elliptical Exerciser HOW to Level the Elliptical ExerciserFeatures of the Console Console DiagramSelect the manual mode HOW to USE the Manual ModePage HOW to USE a Trainer Workout Select a trainer workoutBegin pedaling to start the workout Select the Fat Blocker game HOW to Play the FAT Blocker GamePedal to start the game Follow your progress with the displaySelect the Calorie Destroyer game HOW to Play the Calorie Destroyer GameHOW to USE the Stereo Sound System Maintenance and TroubleshootingHandgrip Pulse Sensor Troubleshooting Audio cable is fully pluggedExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyQty Description Part LIST-Model No. PFEL57907.0Exploded Drawing A-Model No. PFEL57907.0 R1107A Drawing Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT