11.Attach the Left Handlebar Cover (109) to the Console
(5) with three M4 x 16mm Screws (122). Do not over- tighten the Screws; overtightening the Screws may cause the Console to malfunction. Attach the Right Handlebar Cover (110) in the same way.
12.The Console (5) requires four “D” batteries (not includ- ed); alkaline batteries are recommended. Press the indicated tab on the battery drawer and pull the bat- tery drawer down. Press four batteries into the battery clips; make sure that the batteries are oriented as shown by the markings inside of the battery clips. Then, close the battery drawer.
Note: The Console (5) can be operated with an optional power supply instead of batteries. To order a power supply, call
11 |
5 |
110 |
109 |
122 |
122 |
12 |
5 |
Batteries |
Battery |
Drawer |
Tab |
Power |
Jack |
Power |
Supply |
13.Make sure that all parts of the elliptical crosstrainer are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical crosstrainer.
9