ProForm PFEL54931 user manual Tighten both Shoulder Screws at the same time

Page 8

9.Apply a small amount of the included Teflon® lubricant to a paper towel. Rub a thin film of the lubricant onto the Handlebar Legs (79). Next, identify the Left Handlebar (9) and the Right Handlebar (10), which are marked with stickers. Slide the Left Handlebar onto the left Handlebar Leg, and slide the Right Handlebar onto the right Handlebar Leg. Make sure that the

Handlebars are on the correct sides—the upper ends should bend in the direction shown.

Apply a generous amount of grease to the Pivot Axle

(88).Insert the Pivot Axle through the Right Handlebar (10), a Handlebar Spacer (25), and an Upright Spacer

(26)as shown. Next, insert the Pivot Axle into the Upright (2) until the left end of the Pivot Axle is flush with the left side of the Upright. Then, insert the Pivot Axle through the other Upright Spacer (26), the other Handlebar Spacer (25), and the Left Handlebar (9).

Slide an M10.3 Black Washer (53) onto an M8 x 19mm Shoulder Screw (22). Attach a Handlebar Cap

(23)to one end of the Pivot Axle (88) with the Shoulder Screw. Attach the other Handlebar Cap to the other end of the Pivot Axle in the same way.

Tighten both Shoulder Screws at the same time.

10.Attach the Water Bottle Holder (91) to the Upright

(2)with two M4 x 22mm Screws (93).

9

 

 

 

 

 

 

10

 

 

 

Grease

 

 

 

53 22

 

 

 

88

 

 

 

23

9

26

 

25

 

 

26

 

25

 

 

23

 

2

 

 

 

22

 

79

 

 

 

Lubricant

 

 

 

 

53

 

79

 

 

 

 

Lubricant

 

 

10

 

 

 

 

 

 

91

 

 

 

93

 

 

 

2

8

Image 8
Contents Customer HOT Line QUESTIONS?Model No. PFEL54931 Serial No Table of Contents Important Precautions Before YOU Begin FrontBack Right SideAssembly Page Wire harnesses This step Make sure Wire harnesses Do not get PinchedMake sure Do not getTighten both Shoulder Screws at the same time Page HOW to USE the Elliptical Crosstrainer HOW to Plug in the Power CordHOW to Exercise on the Elliptical Crosstrainer This product must be groundedFeatures of the Console To use the manual mode of the console, seeHOW to USE the Manual Mode Select the manual modeTurn on the console Center of the large display willLower sec- tion of the large display Off the plasticMetal contacts. Avoid moving your hands Turn on the fan if desiredHOW to USE a Smart Program Select one of the Smart programsBegin pedaling to start the program Follow your progress with the large displayHOW to Connect Your Portable Stereo Audio CableHOW to Connect Your Home Stereo HOW to Connect Your Computer HOW to Connect Your VCR PressVCR. the play button on your CD player or HOW to USE Programs Directly from OUR WEB Site Return to the elliptical crosstrainer and begin PedalingMaintenance and Troubleshooting HOW to Move the Elliptical CrosstrainerHOW to Level the Elliptical Crosstrainer Handgrip Pulse Sensor TroubleshootingConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyKey Key Qty DescriptionR0204A Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT HOW to Order Replacement PartsLimited Warranty