ProForm PFEX44177.0 user manual Assembly

ASSEMBLY

To hire an authorized service technician to assemble the exercise cycle, call toll-free 1-800-445-2480.

Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

In addition to the included hex keys, assembly requires an adjustable wrench and a Phillips

screwdriver .

Use the drawings below to identify the small parts used in assembly. The number in parentheses below

each drawing is the key number of the part, from the PART LIST on page 22. The number following the paren- theses is the quantity used in assembly. Note: Some small parts may have been preassembled for shipping.

If a part is not in the parts bag, check to see if it has been preassembled.

M10 Nylon	M10 Split	Black M10 Curved	M10 Curved
Locknut (48)–2	Washer (63)–3	Washer (61)–2	Washer (36)–2
M4 x 16mm	M4 x 19mm	M6 x 10mm	Black M10 x 50mm Button
Screw (58)–4	Screw (33)–2	Screw (60)–2	Screw (64)–2
M10 x 50mm Button		M10 x 85mm Button
Screw (46)–3		Screw (56)–4

5