ProForm 831.280181 HOW to Connect Your VCR, Rca, Audio Wire removed from Cable Audio OUT jack

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 15.

A. Plug one end of a 1/8” to RCA stereo audio cable (available at electronics stores) into the jack beneath the console. Plug the other end of the cable into the AUDIO OUT jack on your VCR.

A

ANT. IN

VIDEO AUDIO

IN

RF OUT

CH 3 4

OUT

AUDIO OUT

RIGHT

LEFT

Audio Cable

B. Plug one end of a 1/8” to RCA stereo audio cable (available at electronics stores) into the jack beneath the console. Plug the other end of the cable into an RCA Y-adapter (available at electron- ics stores). Next, remove the wire that is currently plugged into the AUDIO OUT jack on your VCR and plug the wire into the unused side of the Y- adapter. Plug the Y-adapter into the AUDIO OUT jack on your VCR.

B		ANT. IN
	VIDEO AUDIO
	IN
		RF OUT
		CH
	3	4
	OUT
	RCA
Audio	Wire removed from
Cable	AUDIO OUT jack

16