Hoist Fitness CL-2601 owner manual General Maintenance Information

OW N E R S

M A N U A L

Continued: GENERAL MAINTENANCE INFORMATION

Belt and Cable Tension:

FReferring to the Assembly/Owners Manual, when belts or cables are used check all bolts and attachments to be sure they are properly attached.

FCheck slack in belts or cables and readjust tension if needed.

Seat Sleeves & Oilites:

FWipe down adjusting tubes with a dust free rag before applying lubricant.

FLubricate seat sleeves and oilites with a Silicon or Teflon based lubricant spray.

Linear Bearings:

FReferring to the Assembly/ Owners manual carefully dis-assemble the bearing from its housing and place a finger full of light grease (lithium, super lube, etc.) into the inside of the bearing. Using your finger, press the grease into the ball-bearings and their tracks. Repeat until the ball-bearing tracks are full of grease. Insert the shaft back into the bearing and wipe off excess grease.

Anti-Skid Surfaces:

FThese surfaces are designed to supply secure footing and need to be replaced if they appear worn or become slippery.

PLEASE KEEP THIS FOR YOUR RECORDS.

	HOIST	R
2601 Assembly		Page - 48
	FITNESS SYSTEMS