Seiko 7T32 manual Date Setting, Crown

Page 6

DATE SETTING

English

Date

1

1

2

CROWN 1

3

4

NOTES

CROWN 1

1Pull out to first click.

2Turn clockwise until the date for the previous day appears.

3Pull out to second click and turn until the desired date appears.

4Push back in to normal position.

6

1Do not set the date between 9:00 p.m. and 3:00 a.m. Otherwise, the date may not change properly.

*If it is necessary to set the date during that time period, first change the time to any time outside this period, set the date and then reset the correct time.

2It is necessary to adjust the date at the end of February and 30-day months.

Image 6
Contents Cal T32 English Contents Features Seiko Analogue QuartzDisplay and CROWNS/BUTTONS There are three buttons and two crownsDate Setting CrownTime Setting When setting Hour hand, check that AM/PM is correctly setAlarm Adjustment of Alarm handsAlarm time setting TionAlarm ENGAGEMENT/DISENGAGEMENT Alarm engaged Alarm disengagedStopwatch Stopwatch OperationStart Stop Reset Measurement of two competitors Tachymeter To measure the hourly average speed of a vehicleTo measure the hourly rate of operation Adjusting the Hand Position Resetting the BUILT-IN IC Battery Life Indicator Battery ChangeNon-water Resistant To Preserve the Quality of Your WatchWater Resistance BarWater resistant 5/10/15/20 bar 10/15/20Care of Case and Bracelet TemperaturesMagnetism Shocks & VibrationPrecaution Regarding Case Back Protective Film ChemicalsSpecifications