����
�����
Use
“Timer” mode
Your SWATCH® Paparazzi has a “Timer” function adjustable from 1 second to 23 hours, 59 minutes and 59 seconds.
To access the “Timer” mode, refer to the navigation diagram in the “Time” channel described on page 10.
To activate or deactivate the “Timer”
Press PREVIOUS to start the timer...
��
���
���
then PREVIOUS once again to stop it
��
��
��������
�����
����
����
�����
Then press PREVIOUS to continue or NEXT to reset the ti- mer to its initial value
While the timer is operating, you can change mode (by pres- sing CHANNEL), for example to set an alarm, or channel (by a second press on CHANNEL), for example to look up stock prices, then return to the „Timer“ mode, etc.
On most watch faces showing the time, the icon indica- tes that the timer is activated. This icon also appears in the other channels, when the Time and Date bar appears at the top of the screen.
After you stop the chronograph, press ENTER to review the split values.
When the end of timing signal is triggered, press any push button to stop it.
19