��������
������
���� � ����
�������
������
������
�����
������ �����
��� ��
ITEM
„Sound“
„Set Time“
„Time zone“
Radio Transition „Time Format“ „Date Format“ „Units“ „Time Offset“
�
�������
�
�
�������
�
�������
Use
“Settings” mode
You can perform a number of settings on your Swatch Pa- parazzi. To do so, simply choose the “Settings” mode in the “Time” channel and refer to the navigation diagram in the “Time” channel described on page 10.
Choose the desired setting using PREVIOUS and NEXT then confi rm by pressing ENTER. The selected setting is indicated by a black bar (see illustrations).
Next modify the selected value using PREVIOUS and NEXT then confi rm by pressing ENTER.
Settings
DESCRIPTION
Three options allow you to set the sounds emitted by your watch: „All On“ - All possible sounds are used
„All Off“ - No sound is emitted
„Alerts Only“ - Only the alarms (and countdown timing) and alerts generated by the network are emitted.
To set the time by hand. In normal use, i.e. in an area covered by the radio network, your SWATCH® Paparazzi requires no setting to display the correct time, irrespective of the time zone in which you are located.
To select the two time zones manually (press ENTER to go directly to the second time zone).
To activate / deactivate reception of information. To select transition between two different screens To defi ne the date display format
To defi ne the date display format To select the system of units used
To offset the displayed time by a few minutes (up to 15) relative to the actual time.
21