Impex MP-4500 manual See Diagram

Page 10

STEP 2 (See Diagram 2)

A.) Attach the Right Upper Frame (#1) onto the Right Vertical Frame (#4). Secure it with two M10 x 2 ¾” Carriage Bolts (#98), one 4 ¾” x 2 ¾” Bracket (#25), two Ø ¾” Washers (#100), and two M10 Aircraft Nuts (#102). Do not tighten the Nuts and Bolts yet.

B.) Attach the Right Upper Frame to the four Guide Rods (#16). Secure it to each Guide Rod with one M10 x ¾” Allen Bolt (#95) and Ø ¾” Washer (#100).

C.) Securely tighten the Nuts and Bolts previously installed.

D.) Attach the Right Seat Support (#7) to the Right Vertical Frame (#4). Secure it with two M10 x 2 ¾” Carriage Bolts (#98), one 4 ¾” x 2 ¾” Bracket (#25), two Ø ¾” Washers (#100), and two M10 Aircraft Nuts (#102).

E.) Attach the Leg Developer (#8) to the open bracket on the Right Seat Support. Secure it with one Axle (#15), two M10 x ¾” Allen Bolts (#95), and two Ø ¾” Washers (#100).

9

Image 10
Contents Marcy Platinum Toll-Free Customer Service Number Important Safety Notice Page Hardware Pack Hardware Pack Hardware Pack Assembly Instruction Diagram See Diagram See Diagram Diagram Diagram Diagram See Diagram See Diagram Diagram Diagram See Diagram 10 & Front Press Cable Loop Diagram Diagram Front Press Cable Loop Diagram See Diagram 11 & Lower Cable Loop Diagram Diagram Lower Cable Loop Diagram See Diagram 12 & Butterfly Cable Loop Diagram Page Butterfly Cable Loop Diagram See Diagram 13 and Upper Cable Loop Diagram Diagram Upper Cable Loop Diagram See Diagram Diagram Leg Press Cable Loop Diagram See Diagram Parts List MP-4500 Weight Resistance Chart Impex INC