Impex MP-4500 manual See Diagram

STEP 3 (See Diagram 3)

A.) Attach the Front Press Base (#2) to the Right Upper Frame (#1). Secure it with one 6 ¾” Front Press Base Axle (#29), two Ø 1 ¼” x Ø 3/8” Washers (#70), and two M10 Aircraft Nuts (#102). Do not over tighten the Nuts; make sure the Base is able to swivel.

B.) Attach the Front Press (#3) to the Front Press Base (#2). Secure it with one 7 5/8” Front Press Axle (#30), two Ø 1 ¼” x Ø 3/8” Washers (#70), and two M10 Aircraft Nuts (#102). Do not over tighten the Nuts; make sure the Press Arm is able to swivel.

C.) Thread the Short T-shaped Lock Pin (#78) into the tube on the Front Press to obtain the desired Front Press position.

D.) Attach the Backrest Board (#43) to the Backrest Support Frame (#5). Secure it with two M8 x 1 5/8” Allen Bolts (#85) and Ø 5/8” Washers (#101).

E.) Attach the Backrest Support Frame (#5) to the Right Vertical Frame (#4). Secure it with one M10 x 4 3/8” Allen Bolt (#89), two Ø ¾” Washers (#100), and one M10 Aircraft Nut (#102).

F.) Thread a Long T-shaped Lock Pin (#77) into the hole on the Right Vertical Frame to obtain the desired Backrest position.

10