STEP 5 (See Diagram 5)
A.) Attach the Right Butterfly (#10) onto the axle on the Butterfly Base (#13).
B.) Insert the Butterfly Handle (#9) into the pivot on the Right Butterfly. Secure it with one M10 x ¾” Allen Bolt (#95) and Ø 1 ¼” x Ø 3/8” Washer (#70) from the bottom. Do not over tighten the Bolt; make sure the handle is able to swivel.
C.) Repeat Procedure A & B above to install the Left Butterfly (#11).
DIAGRAM 5
13