JVC UX-P30 manual Playing Back Discs CD/CD-R/CD-RW, Playing Back the Entire Disc-Normal Play

Page 18

English

Playing Back Discs (CD/CD-R/CD-RW)

This unit has been designed to playback the following discs—CD, CD-R, and CD-RW.

Continued use of irregular shape discs (heart-shape, octagonal, etc.) can damage the unit.

General Notes

In general, you will have the best performance by keeping your discs and the mechanism clean.

Store discs in their cases, and keep them in cabinets or on shelves.

Keep the unit’s disc tray closed when not in use.

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played back only if they are already “finalized”.

Usually you can play back your original CD-Rs or CD- RWs recorded in music CD format. However, sometimes they may not play depending on their characteristics or recording conditions.

Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

CD-RWs may require a longer readout time. This is caused by the fact that the reflectance of CD-RWs is lower than for regular CDs.

Playing Back the Entire Disc—Normal Play

CD

1 Press CD 0 (or 0 on the unit).

The unit automatically turns on and the disc tray comes out.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

CORRECTINCORRECT

When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press CD 3/8.

CD

 

The disc tray automatically closes and the first track of the CD starts playing.

Track number

Elapsed playing time

The CD automatically stops when the last track of the CD has finished playing.

To stop playing, press 7.

Total track number Total playing time

To remove the disc, press CD 0 (or 0 on the unit).

If the disc cannot be read correctly (because it is scratched, for example)

“00 0000” appears on the display.

If no disc is inserted

“NO DISC” appears on the display.

If a unreadable CD-R or CD-RW is inserted “BLANK CD” appears on the display.

DO NOT try to open or close the disc tray by hand as it will be damaged.

13

Image 18
Contents Instructions PRECAUCIÓN--Botón en espera/encendido Precaución 15 cm To Beam Precautions IntroductionAbout This Manual Contents Location of the Buttons and Controls Front PanelFront Panel Display Window Front Panel Display WindowRemote Control FM antenna Supplied Accessories Connecting AntennasGetting Started To connect an outdoor FM antennaAM antenna Connecting SpeakersRelease the finger from the clamp To connect an outdoor AM antennaConnecting Other Equipment Adjusting the Voltage Selector To connect audio equipmentSetting the AM Tuner Interval Spacing Turning On the PowerSetting the Clock Common OperationsTo select the sound modes, press Adjusting the VolumeSelecting the Sound Modes For private listeningTuning in a Station Presetting StationsListening to FM and AM Broadcasts Tuning in a Preset Station Press CD 0 or 0 on the unit Playing Back Discs CD/CD-R/CD-RWPlaying Back the Entire Disc-Normal Play Press CD 3/8Repeat to program other tracks you want Press CD 3/8 Basic Disc OperationsProgram Play Load a discTo use Random play mode, press Random To cancel the prohibition and unlock Disc, pressRepeating Tracks-Repeat Play To skip the current track, press ¢ or Multi KEYPlaying Back Tapes Playing Back a TapeCheck the recording direction for the tape RecordingRecording on a Tape Press RECRepeat steps 2 and 3 to record other tracks Disc Direct Recording One Track RecordingPlay the track on the disc you wish to Record Press REC You wantUsing the Timers Using Daily Timer and Recording TimerSetting Press Standby/on to turn Using Sleep TimerPress Timer to complete the timer Press SleepMaintenance Handling discs Cleaning the unitHandling cassette tapes Troubleshooting SpecificationsMicro Component System