JVC MX-J50 manual Playing Back CDs, Loading CDs, Playing Back the Entire Discs Continuous Play

Page 16

Playing Back CDs

Loading CDs

1 Press 0for the disc tray (CD 1 to 3) you want to load a CD onto.

The unit automatically turns on and the disc tray comes out. The Powered Rolling Panel also opens automatically.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

CORRECT INCORRECT

When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press the same 0you have pressed in step 1.

The disc tray closes, and the corresponding disc number indicator (CD 1 to CD 3) lights up on the display.

4 Repeat steps 1 to 3 to place other CDs.

When loading more than one CD continuously

When you press 0for the next tray you want to place another CD onto, the first disc tray automatically closes and then the next tray comes out.

About the disc indicators

Each disc indicator corresponds to the disc tray of the same number.

Disc number

 

 

1

2

3

 

 

Disc indicator

 

 

 

 

 

 

 

 

 

 

 

 

Disc marker

The disc marker lights up for the disc number you have selected.

The disc indicator flashes while the corresponding CD is being played.

The disc indicator goes off when the unit has detected that there is no CD on the corresponding disc tray.

Playing Back the Entire Discs — Continuous Play

You can play CDs continuously.

1 Load CDs.

2 Press one of the disc number

CD3

 

 

CD2

 

 

buttons (CD 1, CD 2, and CD 3)

 

 

 

 

 

 

 

for the disc you want to play.

CD1

 

 

 

CD play starts from the first track of the

 

 

 

 

 

 

 

 

selected disc.

 

 

 

 

 

 

 

Tracks of the currently

 

 

playing disc

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

 

3

 

 

 

 

 

1

2

3

4

 

 

 

 

5

6

7

8

 

 

 

 

9

10

11

12

 

 

 

 

13

14

 

 

 

 

 

 

 

 

 

 

 

Track number Elapsed playing time

Pressing CD 6 instead of the disc number buttons starts playing back if a CD is on the trays.

To stop during play, press 7.

To remove the disc, press 0 for the corresponding disc tray.

CD playback sequence

When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.

When CD 1 is pressed : CD 1 ] CD 2 ]CD 3 (then stops)

When CD 2 is pressed : CD 2 ] CD 3 ]CD 1 (then stops)

When CD 3 is pressed : CD 3 ] CD 1 ]CD 2 (then stops)

*When only 2 CDs are loaded, they are played in the same order, but the disc tray without a CD is skipped.

Basic CD Operations

While playing a CD, you can do the following operations.

To exchange CDs during playback of another

Press 0corresponding to a CD, not playing or selected currently, to eject and exchange the CD.

If you exchange CDs during play, the current play will not stop until all CDs you have exchanged are played.

To stop play for a moment

 

Press CD 6.

 

While pausing, the elapsed playing time flashes

C D

on the display.

 

To resume play, press CD 6again.

 

– 13 –

Image 16
Contents MX-J50 Class Laser Product CA-MXJ50 Introduction PrecautionsAbout This Manual Contents Powered Rolling Panel Location of the Buttons and ControlsFront Panel Powered Rolling PanelDisplay Window Remote Control Remote ControlUnpacking Connecting Antennas Putting the Batteries into the Remote ControlGetting Started FM antennaConnecting Speakers Release the finger from the clampAM antenna To connect front speakersConnecting Other Equipment Press and hold Demo for more than Seconds.DEMOTo connect a subwoofer To connect an analog componentTurning On the Power and Selecting the Sources Setting the ClockCommon Operations Adjusting the Volume To turn down the volume level temporarilyReinforcing the Bass Sound Selecting the Sound ModesCreating Your Own Sound Mode Manual Mode Adjust the SEA patternTo use your own sound mode On the unit only Press and hold SEA Control untilTuning in a Station Tuning in a Preset StationPresetting Stations Listening to FM and AM BroadcastsPlaying Back CDs Loading CDsPlaying Back the Entire Discs Continuous Play Basic CD OperationsProgram Play Playing at Random Random Play Repeating Tracks or CDs Repeat PlayProhibiting Disc Ejection Tray Lock Prepare CDsPlaying Back a Tape Playing Back TapesLocating the beginning of a Song Music Scan On the remote control RecordingRecording Tapes on Deck B Start recording. On the unit Press REC START/STOPDubbing Tapes CD Direct RecordingTo cancel Auto Edit Recording Auto Edit RecordingPress SET To change the tape length manuallyUsing the Timers Using Daily TimerUsing Recording Timer Using Sleep Timer Timer PriorityHandling discs MaintenanceCassette decks Troubleshooting 0599MWMMDWJEM