JVC MX-J50 manual Using the Timers, Using Daily Timer

Page 23

SEA CONTROL

SET

PRESET

SEA CONTROL

SET

PRESET

SEA CONTROL

SET

PRESET

Using the Timers	Continued

There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the unit. (See page 9.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the

on-time comes (the indicator flashes just before the on- time, and continues flashing while the timer is operating). Then, when the off-time comes (“OFF” flashes just before the off-time), the unit automatically turns off (stands by).

The timer setting remains in memory until you change it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting timer, press CANCEL. (However, this does not always work. If CANCEL does not work, press TIMER/CLOCK repeatedly and start from step 1 again.)

On the unit ONLY:

	1	Press TIMER/CLOCK until	TIMER
	1	Press TIMER/CLOCK until	/CLOCK
			/CLOCK
		“DAILY” appears on the display.
		DAILY

The DAILY indicator also starts flashing on the display.

•Each time you press the button, the timer setting modes change as follows:

DAILY ON TIME REC

Canceled		Clock		ON TIME
Canceled		Clock		ON TIME
		setting

(See page 9.)

2 Press TIMER/CLOCK again.

“ON TIME” appears for 2 seconds, then the unit	TIMER
enters on-time setting mode.	/CLOCK
enters on-time setting mode.
DAILY

DAILY

3 Set the on-time you want the unit to turn on.

1) Press 4 or ¢to set the hour, then press SET.

2)Press 4or ¢to set the minute, then press

SET.

“OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode.

4 Set the off-time you want the unit to turn off (on standby).

1)Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute, then

press SET.

The unit enters source selecting mode.

DAILY

5 Press 4or ¢to select the source to play, then press SET.

•Each time you press 4 or ¢, the source changes as follows:

TUNER FM TUNER AM

AUX TAPE – CD – – –

TUNER FM: tunes into a specified preset FM station. =go to step 6.

TUNER AM: tunes into a specified preset AM station.

= go to step 6.

–CD – – –: plays a disc from a specified track of a specified disc. =go to step 6.

• Make sure there is a CD on the selected disc number tray.

TAPE: plays a tape in deck A or B. =go to step 7.

•Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.

•Make sure that the tape direction is correct. AUX: plays an external source. = go to step 7.

•To use this setting, the external component has to be equipped with the timer function.

– 20 –

Image 23

Contents MX-J50 Class Laser Product CA-MXJ50 About This Manual PrecautionsIntroduction Contents Location of the Buttons and Controls Powered Rolling PanelDisplay Window Powered Rolling PanelFront Panel Remote Control Remote ControlFM antenna Unpacking Connecting AntennasPutting the Batteries into the Remote Control Getting StartedTo connect front speakers Connecting SpeakersRelease the finger from the clamp AM antennaTo connect an analog component Connecting Other EquipmentPress and hold Demo for more than Seconds.DEMO To connect a subwooferCommon Operations Setting the ClockTurning On the Power and Selecting the Sources Selecting the Sound Modes Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundOn the unit only Press and hold SEA Control until Creating Your Own Sound Mode Manual ModeAdjust the SEA pattern To use your own sound modeListening to FM and AM Broadcasts Tuning in a StationTuning in a Preset Station Presetting StationsBasic CD Operations Playing Back CDsLoading CDs Playing Back the Entire Discs Continuous PlayProgram Play Prepare CDs Playing at Random Random PlayRepeating Tracks or CDs Repeat Play Prohibiting Disc Ejection Tray LockLocating the beginning of a Song Music Scan Playing Back TapesPlaying Back a Tape Start recording. On the unit Press REC START/STOP On the remote controlRecording Recording Tapes on Deck BCD Direct Recording Dubbing TapesTo change the tape length manually To cancel Auto Edit RecordingAuto Edit Recording Press SETUsing Daily Timer Using the TimersUsing Recording Timer Timer Priority Using Sleep TimerCassette decks MaintenanceHandling discs Troubleshooting 0599MWMMDWJEM