JVC LVT1507-012A manual European Union only

Page 2

Warnings, Cautions, and Others /

Caution––STANDBY/ON button!

Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus, ensure that the plug is easily accessible.

The STANDBY/ON button in any position does not disconnect the mains line.

• When the unit is on standby, the STANDBY lamp lights red.

When the unit is turned on, the STANDBY lamp goes off. The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

CAUTION

• Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted candles, on the apparatus.

When discarding batteries, environmental problems must be considered and local rules or laws governing

the disposal of these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage.

Locate the apparatus as follows:

Front:

No obstructions open spacing.

Sides:

No obstructions in 10 cm from the sides.

Top:

No obstructions in 10 cm from the top.

Back:

No obstructions in 15 cm from the back.

Bottom:

No obstructions, place on the level surface.

In addition, maintain the best possible air circulation as illustrated.

Spacing 15 cm or more

Wall or obstructions

RX-5062S

Front

Stand height 15 cm or more

Floor

[European Union only]

G-1

Image 2
Contents RX-5062S LVT1507-012A USEuropean Union only Table of Contents Display Parts IdentificationFront Panel Remote Control Rear PanelPutting Batteries in the Remote Control Before Installation Adjusting the Voltage SelectorChecking the Supplied Accessories Connecting the FM and AM AntennasAM antenna connections Connecting the Speakers and SubwooferConnecting the speakers AM Loop AntennaPlacing speakers Connecting Audio/Video ComponentsConnecting the subwoofer Analog ConnectionsVideo camera, etc Video component connectionsDVD player Digital Connections Connecting the Power CordPlug the power cord into an AC outlet Digital input terminalsBasic Operations Daily Operational Procedure Selecting the Source to PlayTurning On the Power Sound Adjusting the VolumeWhen analog input is selected Always lights up Picture from a video component such as the VCR or DVDPress Subwoofer OUT ON/OFF to cancel the subwoofer output Selecting the Analog or Digital Input ModeListening with headphones Turning On and OffChanging the Display Brightness Attenuating the Input SignalChanging the Source Name Muting the Sound Using the Sleep TimerBasic adjustment auto memory Recording a sourceUsing Preset Tuning Setting the AM Tuner Interval SpacingTuning in to Stations Manually Receiving Radio BroadcastsWhile listening to an FM station, press FM Mode Press the number buttons to select a preset channel numberSelecting the FM Reception Mode To tune in a preset stationPress Quick Speaker Setup Basic SettingsQuick Speaker Setup Channel numberPress Setting Basic Setting ItemsBasic Procedure Ex. When setting Virtual Surround Back to Vrtl SB onSetting the Bass Sounds Setting the SpeakersSetting the Speaker Distance Selecting the Main or Sub Channel Select the playback sounds channelSelect Vrtl SB on to activate Virtual Surround Back Setting for Effective Surround OperationsSetting the Digital Input Terminals Set the components connected to the digital terminalsPress Adjust Adjusting SoundBasic Adjustment Items Ex. When adjusting the subwoofer level toAdjusting the Equalization Patterns Adjusting the Speaker Output LevelsDolby Digital*1 Using the Surround ModesReproducing Theater Ambience Introducing the Surround Modes Dolby Digital 5.1CHDTS Digital Surround What is Linear PCM?What is Dual Mono? DTS 96/24Select and play any source Press Surround to activate the Surround modeActivating the Surround Modes Introducing the DSP Modes Using the DSP ModesReproducing the Sound Field Digital Acoustic Processor DAP modesActivating the DSP Modes To cancel the DSP modeMulti-channel digital signals All Channel StereoSound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerSelect a disc number Operating Video ComponentsCD changer DVD playerTroubleshooting Problem Possible Cause SolutionAmplifier SpecificationsOutput Power AudioGeneral FM tuner IHFAM tuner Receiver