JVC LVT1507-012A manual FM tuner IHF, AM tuner, General

Page 34

English

Specifications

FM tuner (IHF)

 

 

Tuning Range:

 

87.50 MHz to 108.00 MHz

Usable Sensitivity

Monaural:

12.8 dBf (1.2 µV/75 )

50 dB Quieting Sensitivity

Monaural:

16.0 dBf (1.7 µV/75 )

 

Stereo:

37.5 dBf (20.5 µV/75 )

Stereo Separation at OUT (REC):

 

35 dB at 1 kHz

AM tuner

 

 

Tuning Range:

 

531 kHz to 1 710 kHz (at 9 kHz intervals)

 

 

530 kHz to 1 710 kHz (at 10 kHz intervals)

General

 

 

Power Requirements:

 

AC 110 V/127 V/220 V/230 V – 240 V ,

 

 

adjustable with the voltage selector, 50 Hz/60 Hz

Power Consumption:

 

150 W (at operation)

 

 

5 W (in standby mode)

Dimensions (W x H x D):

 

435 mm x 146.5 mm x 369.5 mm

Mass:

 

7.5 kg

 

 

Designs and specifications are subject to change without notice.

32

Image 34
Contents RX-5062S LVT1507-012A USEuropean Union only Table of Contents Front Panel Parts IdentificationDisplay Remote Control Rear PanelPutting Batteries in the Remote Control Before Installation Adjusting the Voltage SelectorChecking the Supplied Accessories Connecting the FM and AM AntennasAM antenna connections Connecting the Speakers and SubwooferConnecting the speakers AM Loop AntennaPlacing speakers Connecting Audio/Video ComponentsConnecting the subwoofer Analog ConnectionsDVD player Video component connectionsVideo camera, etc Digital Connections Connecting the Power CordPlug the power cord into an AC outlet Digital input terminalsTurning On the Power Daily Operational Procedure Selecting the Source to PlayBasic Operations Sound Adjusting the VolumeWhen analog input is selected Always lights up Picture from a video component such as the VCR or DVDPress Subwoofer OUT ON/OFF to cancel the subwoofer output Selecting the Analog or Digital Input ModeListening with headphones Turning On and OffChanging the Source Name Attenuating the Input SignalChanging the Display Brightness Muting the Sound Using the Sleep TimerBasic adjustment auto memory Recording a sourceUsing Preset Tuning Setting the AM Tuner Interval SpacingTuning in to Stations Manually Receiving Radio BroadcastsWhile listening to an FM station, press FM Mode Press the number buttons to select a preset channel numberSelecting the FM Reception Mode To tune in a preset stationPress Quick Speaker Setup Basic SettingsQuick Speaker Setup Channel numberPress Setting Basic Setting ItemsBasic Procedure Ex. When setting Virtual Surround Back to Vrtl SB onSetting the Speaker Distance Setting the SpeakersSetting the Bass Sounds Selecting the Main or Sub Channel Select the playback sounds channelSelect Vrtl SB on to activate Virtual Surround Back Setting for Effective Surround OperationsSetting the Digital Input Terminals Set the components connected to the digital terminalsPress Adjust Adjusting SoundBasic Adjustment Items Ex. When adjusting the subwoofer level toAdjusting the Equalization Patterns Adjusting the Speaker Output LevelsDolby Digital*1 Using the Surround ModesReproducing Theater Ambience Introducing the Surround Modes Dolby Digital 5.1CHDTS Digital Surround What is Linear PCM?What is Dual Mono? DTS 96/24Activating the Surround Modes Press Surround to activate the Surround modeSelect and play any source Introducing the DSP Modes Using the DSP ModesReproducing the Sound Field Digital Acoustic Processor DAP modesActivating the DSP Modes To cancel the DSP modeMulti-channel digital signals All Channel StereoSound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerSelect a disc number Operating Video ComponentsCD changer DVD playerTroubleshooting Problem Possible Cause SolutionAmplifier SpecificationsOutput Power AudioAM tuner FM tuner IHFGeneral Receiver