JVC RX-889PGD, LVT0178-001A manual Press %/ Þ/ @/ #to adjust the SEA mode as you want, To Tuner

Page 37

4. Press %/ Þto move to “SEA ADJUST.”

The SEA ADJUST menu appears.

5.Press %/ Þ/ @/ #to adjust the SEA mode as you want.

SEA ADJUST

SEA USERMODE

100 1k 10kHz

SET:MEMORY

“LFE ATT.”:

Set the low frequency effect attenuator

 

level (see page 15).

“COMP.”:

Set the dynamic range compression

 

(see page 15).

“DIGITAL 1/2/3”:

Set the digital input terminal

 

(see page 13).

“FL DISP.”:

Shows the disc text information on the

 

display (see page 13).

English

@/ # : Select the frequency ranges.

%/ Þ: Adjust the frequency levels.

6.Press SET to store the setting into the SEA USERMODE.

•If you press EXIT, without pressing SET in this step, you can return to the SEA menu. (The adjustment you have made is active but not stored.)

7.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Setting the Basic Setting Items (Also see

pages 12 – 15)

Notes:

*Not adjustable when “CENTER SPK” is set to “NONE” (see page 14).

**Not adjustable when “REAR SPK” is set to “NONE” (see page 14).

4.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Operating the Tuner (Also see pages 17 and 18)

1. Press MENU.

The MAIN MENU appears on the TV.

• Pressing one of the % / Þ / @/ #buttons also displays the

1. Press MENU.

The MAIN MENU appears on the TV.

• Pressing one of the %/ Þ / @/ #buttons also displays the

MAIN MENU.

2. Press %/ Þto move

to “TUNER

TUNER CONTROL

MAIN MENU.

2.Press %/ Þto move to “SETTING,” then

press @/ #.

SETTING 1

 

 

SUBWOOFER

: NO

FRONT

SPK

: LARGE

CENTER

SPK

: SMALL

REAR

SPK

: LARGE

CONTROL,” then

press @/ #.

The TUNER CONTROL menu appears.

PRESET CH : 1

BAND :FM FREQUENCY : 87.50MHz

FM MODE :AUTO

PRESET MEMORY

:OPERATE

The SETTING 1 or SETTING 2 menu appears.

CNTR DELAY

: 3msec

REAR DELAY

: 5msec

CROSSOVER

:100Hz

NEXT

PAGE

3. Press %/ Þto move to the item you want to set or adjust, then press @/ #.

3.Press %/ Þto move to the item you want to set or adjust, then press

@/ #.

•To go to the SETTING 2

menu, move to “NEXT PAGE,” then press @/ #.

•To go back to the SETTING

1 menu, move to “PREVIOUS PAGE,” then press @/ #.

:ENTER

SETTING 2

LFE ATT. : 0dB

COMP. : OFF

DIGITAL 1 : DBS

DIGITAL 2 : CD

DIGITAL 3 : MD

FL DISP. : NORMAL

PREVIOUSPAGE

:ENTER

On the TUNER CONTROL menu, you can do the following:

“PRESET CH”:

Select a preset channel station.

“BAND”:

Select the band.

“FREQUENCY”:

Tune in a station manually.

“FM MODE”:

Select the FM reception mode.*

“PRESET MEMORY”: See “Storing the Preset Stations” on the next page.

Note:

* Not displayed when an AM station is selected.

4. When you finish, press EXIT repeatedly until the

On the SETTING 1 and 2 menus, you can do the following:

“SUBWOOFER”:

Set the subwoofer information

 

(see page 12).

“FRONT SPK”:

Set the front speaker information

 

(see page 14).

“CENTER SPK”:

Set the center speaker information

 

(see page 14).

“REAR SPK”:

Set the rear speaker information

 

(see page 14).

“CNTR DELAY”:

Adjust the delay time of the center

 

speaker output (see page 14). *

“REAR DELAY”:

Adjust the delay time of the rear

 

speaker output (see page 14). **

“CROSSOVER”:

Set the crossover frequency

 

(see page 15).

menu disappears from the TV.

34

Page 36 Page 38
Image 37
Page 36 Page 38
Contents RX-889PGD Precaución English Español Table of Contents Parts Identification Remote ControlFront Panel Checking the Supplied Accessories Before Installation Connecting the FM and AM AntennasSetting the Voltage Selector Switch Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers AM Antenna ConnectionsConnecting the rear and center speakers Connecting Audio/Video ComponentsConnecting the subwoofer speaker About the speaker impedanceTo audio input Cassette deck To audio output CD playerVHS or VHS VCR To audio input MD recorder To audio outputTo composite To S-video output‚ To composite video output DVD playerPutting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet Digital connectionsFrom the remote control Turning the Power On and Off StandbyBasic Operations Selecting the Source to PlaySelecting the Front Speakers Adjusting the VolumeEtc Selecting different sources for picture and soundListening at Low Volume Loudness Attenuating the Input SignalAdjusting the Subwoofer Output Level Muting the SoundAdjusting the Front Speaker Output Balance Basic SettingsSetting the Subwoofer Information Recording a SourceSelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingShowing the Text Information on Display Center Delay Time Setting Setting the Speakers for the DSP ModesFront, Center, and Rear Speaker Setting Rear Delay Time SettingLow Frequency Effect Attenuator Setting Crossover Frequency SettingDynamic Range Compression Setting Frequency appears on the displayUsing the Sleep Timer Setting the AM Tuner Interval SpacingAdjust the sound using the functions listed above Press ONE Touch OPERATION. OnetouchoperationTuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Selecting the FM Reception Mode Assigning Names to Preset StationsSelecting Your Favorite SEA Mode Using the SEA ModesCreating Your Own SEA Mode 3D-PHONIC modes Using the DSP ModesDAP modes Surround modes DVD Multi Playback ModeFront Available DSP Modes According to the Speaker ArrangementAdjusting the DAP Modes Adjusting the 3D-PHONIC ModesAdjusting the Surround Modes Adjust the center tone An appropriate Surround modePress DOLBY/DTS/MPEG Surround ON/OFF to activateRepeatedly until Theater or JVC Theater Surround adjustmentsDIG Theater appears on Display Press Test to check the speakerLamp on the button lights up Activating the DSP ModesSelect and play a sound source Press Surround ON/OFF soTo cancel the DSP mode Mode you want appears on DisplayPress Surround Mode repeatedly until For the other DSP modesActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModeDVD Multi appears on Display Tone appears on the displayPress DVD Multi so that DVD 10 keys are activated for adjusting the soundMulti appears on the display Using the On-Screen Menus To Loudness Input Attenuator modePress @/ #to turn Loudness on orActivating the DVD Multi Playback Mode To SEA ModeSelecting Your Favorite SEA Mode Creating Your Own SEA ModePress SET to store the setting into the SEA Usermode Press %/ Þ/ @/ #to adjust the SEA mode as you wantPress %/ Þto move to SETTING, then Press @/ # Setting the Basic Setting Items Also seePreset station number Press %/ Þto move to Preset Name Then press SETPress %/ Þto move to Tuner CONTROL, then press @/ # Press %/ Þ / @/ #to Move in front of a character you wantRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemSame time Automatic Source SelectionCD player MD recorder Text Compu Link Remote Control SystemDisplaying the Disc Information on the TV screen Disc Search Only for CD PlayerShowing the Disc Information on the TV Screen Press Text Display while CD or MD is selected as the sourceTo exit from the Disc information screen Disc Information screen appears on the TVPress %/ Þto move to SEARCH, then Press SET Press Text Display while CD is selected as the sourcePress %/ Þto move To Performer Then press SET Press SET againPress %/ Þto move To GENRE, then Press SET Press %/ Þto move to Search Then press SETPress %/ Þto move To Title INPUT, then press SET Entering the Disc InformationPress %/ Þto move to the genre you want, then press SET Press Text Display while MD is selected as the sourceTo insert a space, press %/ Þ To correct an incorrect characterSound control section Amplifier Operating JVC’s Audio/Video ComponentsCD player CD player-changer TunerCassette deck TurntableMD recorder DVD playerOperating Other Manufacturers’ Video Equipment If there are more than one code listed for your brand of TVRelease TV/CATV/DBS Try to operate your TV by pressing TV/CATV DBSRelease VCR If there are more than one code listed for your brandTry to operate your VCR by pressing VCR Manufacturers’ codes for TV Manufacturers’ codes for DBS tuner Manufacturers’ codes for Catv converters SEI Problem Possible Cause Solution TroubleshootingAmplifier SpecificationsVideo FM tuner IHF Tuning Range Usable Sensitivity Signal-to-Noise RatioAM tuner GeneralPrecaução para a ligação à tensão da rede CA Precaución para la línea de la red CA
Top Page Image Contents