JVC LVT0142-006A, RX-669PGD Selecting the Front Speakers, Muting the Sound, Recording a Source

Page 12

English

Adjusting the Volume

On the front panel:

To increase the volume, turn MASTER

 

MASTER VOLUME

 

 

 

 

 

VOLUME clockwise.

–

+

 

 

 

 

 

To decrease the volume, turn it

 

 

 

 

 

counterclockwise.

 

 

 

 

 

• When you turn MASTER VOLUME rapidly,

 

 

 

 

 

the volume level also changes rapidly.

 

 

 

 

 

• When you turn MASTER VOLUME slowly,

 

 

 

 

 

the volume level also changes slowly.

 

 

 

 

 

From the remote control:

 

 

 

 

 

 

 

 

 

 

To increase the volume, press VOLUME +.

 

VOLUME

To decrease the volume, press VOLUME –.

 

 

 

 

 

 

 

 

 

 

CAUTION:

Always set the volume to the minimum before starting any source. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.

Note:

The volume level can be adjusted within the range of “0” (minimum) to “80” (maximum).

Selecting the Front Speakers

On the front panel ONLY:

SPEAKERS

 

When you have connected two pairs of the front

1

2

 

 

speakers, you can select which to use. Pressing

SPEAKERS 1 or SPEAKERS 2 activates the

_ ON Ñ OFF

 

respective set of speakers.

 

•To use the speakers connected to the FRONT SPEAKERS 1 terminals, press SPEAKERS 1 to set it in the _ON position, and press SPEAKERS 2 to set it in the ÑOFF position.

•To use the speakers connected to the FRONT SPEAKERS 2 terminals, press SPEAKERS 2 to set it in the _ON position, and press SPEAKERS 1 to set it in the ÑOFF position.

•To use both sets of the speakers, press SPEAKERS 1 to set it in the _ON position, and press SPEAKERS 2 to set it in the _ON position.

•To use neither set of the speakers, press SPEAKERS 1 and SPEAKERS 2 to set them in the ÑOFF position.

Note:

When only one set of the speakers is connected to either the FRONT SPEAKERS 1 or 2 terminals, do not activate both pairs of the speakers. If you do, no sound comes out of the front speakers.

Listening only with headphones

1.Connect a pair of headphones to the PHONES jack on the front panel.

2.SPEAKERS 1 and SPEAKERS 2 to set them in the ÑOFF position.

CAUTION:

Be sure to turn down the volume before connecting or putting on headphones, as high volume can damage both the headphones and your hearing.

Note:

You cannot shut off the sound through the other speakers using the SPEAKERS 1 and 2 buttons.

Muting the Sound

From the remote control ONLY:

 

Press MUTING to mute the sound through all

M T NG

 

U I

speakers and headphones connected.

 

“MUTING” appears on the display and the volume turns off (the volume level indicator goes off).

To restore the sound, press MUTING again so that “OFF” appears on the display.

•Turning MASTER VOLUME or pressing VOLUME +/– also restores the sound.

Recording a Source

You can record any source playing through the receiver to a cassette deck (or an MD recorder) connected to the TAPE/MD jacks and the VCR connected to the VCR jacks at the same time.

While recording, you can listen to the selected sound source at whatever sound level you like, without affecting the sound levels of the recording.

Note:

The output volume level, tone adjustment (see page 10), bass boost (see page 10) and DSP modes (see page 17) cannot affect the recording.

IMPORTANT:

Before recording, turn off the DVD MULTI playback mode.

9

Page 11 Page 13
Image 12
Page 11 Page 13
Contents RX-669PGD Precaución English Table of Contents Front Panel Remote Control Parts IdentificationTo use the Cursor control buttons q on the front panel Before Installation Connecting the FM and AM Antennas Checking the Supplied AccessoriesSetting the Voltage Selector Switch Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers Connecting the rear and center speakersConnecting Audio/Video Components Connecting the subwoofer speakerAudio component connections Video component connections TV as the monitorConnecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet Replace the coverTurning the Power On and Off Standby From the remote controlBasic Operations On the front panelSelecting the Front Speakers Muting the SoundRecording a Source Attenuating the Input Signal Adjusting the Front Speaker Output BalanceAdjusting the Tone Reinforcing the BassBasic Settings Setting Center and Rear Speakers for DSP ModesPress Setting so that the cursor Changing the Source NameUsing the Sleep Timer Adjust the sound using the functions listed abovePress ONE Touch Operation Setting the AM Tuner Interval Spacing Using Preset Tuning Tuning in Stations ManuallyReceiving Radio Broadcasts Press 10 keys to select a preset channel number To tune in a preset stationWhen an FM stereo broadcast is hard to receive or noisy Press FM/AMUsing the DSP Modes 3D-PHONIC modesSurround Modes Dolby SurroundAvailable DSP Modes According to the Speaker Arrangement Speaker arrangements Available DSP modesAdjusting the 3D-PHONIC Modes Adjusting DAP Digital Acoustic Processor ModesPress Rearl / + to adjust the rear speaker output level Until the mode PRO Logic Or Theater appears on DisplayPress Test to check the speaker Output balancePress Surround repeatedly Until the DSP mode you want To cancel the DSP modeActivating the DSP Modes Select and play a sound sourceUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeUsing the On-Screen Menus Press % / Þto move To Bass Boost Press @/ #to turn Press any one of %/ Þ / @/ #Press %/ Þto move to Sound CONTROL, then press @/ # @/ #Press %/ Þ/ @/ #to adjust the tone as you want Press %/ Þto move to SETTING, then press @/ #Press % / Þto move to Surround LEVEL, then press @/ # Press %/ Þto move to Tone CONTROL, then press @/ #Press %/ Þto move To Preset MEMORY, then press @/ # Storing the Preset Stations Also seePreset Memory menu Appears Press %/ Þto move To Tuner CONTROL, then Press @/ #Compu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverSame time Automatic Source SelectionText Compu Link Remote Control System Displaying the Disc Information on the TV screenDisc Search Only for CD Player Disc Title InputPress Text Display while CD or MD is selected as the source Showing the Disc Information on the TV ScreenTo exit from the Disc information screen Press Text Display while CD is selected as the source Press %/ Þto move to SEARCH, then press on Screen SETPress %/ Þto move to Performer Then press on Press on Screen SET againPress %/ Þto move To Search Then press on Press %/ Þto move To GENRE, then Press on ScreenThen press on Screen SET Entering the Disc InformationUp to 32 characters Enter the disc title, referring to steps 3Press Text Display while MD is selected as the source For the MD recorderOperating JVC’s Audio/Video Components TunerSound control section Amplifier CD playerCassette deck MD recorderDVD player Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierFM tuner IHF AM tunerPrecaução para a ligação à tensão da rede CA Precaución para la línea de la red CA

RX-669P, RX-669PGD, LVT0142-006A specifications

JVC, a renowned name in the world of audio and visual technology, continues to impress with its range of high-quality products. Among these, the JVC LVT0142-006A, RX-669PGD, and RX-669P stand out for their remarkable features and performance.

The JVC LVT0142-006A is primarily recognized as a versatile speaker system designed to complement various home audio setups. This model boasts a sleek design that seamlessly fits into any environment, with a focus on delivering powerful sound. It integrates advanced audio technologies to ensure clarity and precision in output, making it suitable for music lovers and film enthusiasts alike. The speaker also supports a range of input options, allowing users to connect multiple devices effortlessly.

Moving on to the RX-669PGD, this receiver is packed with features tailored for optimal sound reproduction and comprehensive connectivity. It supports a variety of audio formats, ensuring that listeners can enjoy their favorite music in multiple ways. The RX-669PGD is equipped with an integrated amplifier that delivers robust power, providing an immersive listening experience. Its user-friendly interface allows for easy navigation, while the built-in Bluetooth capability enables wireless streaming from smartphones and tablets.

The RX-669P model takes the legacy of the RX-669PGD further by incorporating extensive compatibility options. It features multiple HDMI inputs and outputs, making it an excellent choice for home theater setups. This model supports 4K video passthrough, ensuring that users can enjoy high-resolution content without any loss in quality. With its surround sound capabilities, the RX-669P transforms any living space into a dynamic audio environment, significantly enhancing the viewing experience of movies and shows.

All three products embody JVC’s commitment to quality and innovation. They utilize cutting-edge materials in their construction, ensuring durability and longevity. Furthermore, the design philosophy behind these models emphasizes not only performance but also aesthetics, making them attractive additions to any home.

In summary, the JVC LVT0142-006A, RX-669PGD, and RX-669P are exemplary products that showcase JVC's dedication to delivering high-fidelity audio solutions. With their advanced features, versatile connectivity options, and sleek designs, they cater to the demands of modern consumers while enhancing the overall audio experience.
Top Page Image Contents