JVC LVT0142-006A, RX-669PGD manual Press Test to check the speaker, Output balance, Tone

Page 21

From the remote control:

SOUND

1. Press SOUND CONTROL.

CONTROL

 

The 10 keys are activated for sound adjustments.

 

2. Press SURROUND repeatedly

SURROUND

until the DAP mode — LIVE

3

CLUB, DANCE CLUB, HALL, or

 

PAVILION — appears on the

 

display.

 

The DSP and the selected DAP mode indicators also light up on

3. Press TEST to check the speaker

TEST

output balance.

 

2

“TEST TONE L” starts flashing on the

 

 

display, and a test tone comes out of the

 

 

speakers in the following order:

 

 

 

 

 

 

TEST TONE L

 

 

TEST TONE C

 

 

 

 

(Left front speaker)

(Center speaker)

 

 

 

 

 

TEST TONE S

TEST TONE R

 

 

 

(Rear speaker)

 

(Right front speaker)

 

 

Notes:

English

the display.

3.Press REAR•L – / + to adjust the rear speaker output level.

•Pressing REAR•L – decreases the output level up to –10 dB.

•Pressing REAR•L + increases the output level up to +10 dB.

– REAR•L +

8 9

•You can adjust the speaker output levels without outputting the test tone.

•The speaker indicators also light on the display while the test tone comes out of the speakers.

L: Lights when the test tone comes out of the

L C R left front speaker.

C: Lights when the test tone comes out of the

S

center speaker.

R: Lights when the test tone comes out of the

 

 

right front speaker.

Note:

You cannot adjust the left and right rear speaker output levels separately.

4. Press EFFECT to select an effect

EFFECT

level you want.

 

 

4

• Each time you press the button, the effect

 

level changes as follows:

 

 

 

DSP EFFECT 1

 

DSP EFFECT 2

 

DSP EFFECT 3

 

 

DSP EFFECT 5

DSP EFFECT 4

As the number increases, the selected DAP mode becomes stronger.

Adjusting the Surround Modes — Dolby

Surround and JVC Theater Surround

S: Lights when the test tone comes out of the

rear speakers.

4.

Press CENTER – / + repeatedly to

– CENTER +

 

adjust the center speaker output

5

6

 

level (from –10 to +10).

 

 

5.

Press REAR•L – / + to adjust the

– REAR•L +

 

 

rear speaker output level (from

8

9

 

–10 to +10).

 

 

Notes:

•You cannot adjust the left and right rear speaker output levels separately.

•You cannot use the REAR•R –/+ buttons to adjust the speaker output levels.

TEST

6. Press TEST again to stop the test

Before you start, remember...

tone.

2

•Make sure that you have set the speaker information correctly (see page 11).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•You can only adjust the effect level when selecting JVC Theater Surround.

•You can only adjust the rear and/or center speaker output levels when you have connected rear speakers and/or a center speaker and have set “REAR SPK” and/or “CENTER SPK” correctly. See page 11.

From the remote control:

SOUND

 

CONTROL

1. Press SOUND CONTROL.

The 10 keys are activated for sound adjustments.

2. Press SURROUND repeatedly

SURROUND

until the mode — “PRO LOGIC”

3

or “THEATER” — appears on the

 

display.

 

•When selecting “PRO LOGIC,” the PRO LOGIC indicator also lights up on the display.

•When selecting “THEATER,” the DSP, PRO LOGIC and THEATER indicators also light up on the display.

7. ONLY FOR “THEATER”:

Press EFFECT to select an effect

EFFECT

4

level you want.

 

•Each time you press the button, the effect level changes as follows:

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5

DSP EFFECT 4

As the number increases, JVC Theater Surround becomes stronger.

18

Page 20 Page 22
Image 21
Page 20 Page 22
Contents RX-669PGD Precaución English Table of Contents Front Panel Remote Control Parts IdentificationTo use the Cursor control buttons q on the front panel Checking the Supplied Accessories Before Installation Connecting the FM and AM AntennasSetting the Voltage Selector Switch Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers Connecting the rear and center speakersConnecting Audio/Video Components Connecting the subwoofer speakerAudio component connections TV as the monitor Video component connectionsPutting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet Replace the coverFrom the remote control Turning the Power On and Off StandbyBasic Operations On the front panelSelecting the Front Speakers Muting the SoundRecording a Source Adjusting the Front Speaker Output Balance Attenuating the Input SignalAdjusting the Tone Reinforcing the BassSetting Center and Rear Speakers for DSP Modes Basic SettingsPress Setting so that the cursor Changing the Source NameUsing the Sleep Timer Adjust the sound using the functions listed abovePress ONE Touch Operation Setting the AM Tuner Interval Spacing Using Preset Tuning Tuning in Stations ManuallyReceiving Radio Broadcasts To tune in a preset station Press 10 keys to select a preset channel numberWhen an FM stereo broadcast is hard to receive or noisy Press FM/AM3D-PHONIC modes Using the DSP ModesSurround Modes Dolby SurroundSpeaker arrangements Available DSP modes Available DSP Modes According to the Speaker ArrangementAdjusting DAP Digital Acoustic Processor Modes Adjusting the 3D-PHONIC ModesUntil the mode PRO Logic Or Theater appears on Display Press Rearl / + to adjust the rear speaker output levelPress Test to check the speaker Output balanceTo cancel the DSP mode Press Surround repeatedly Until the DSP mode you wantActivating the DSP Modes Select and play a sound sourceActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModeUsing the On-Screen Menus Press any one of %/ Þ / @/ # Press % / Þto move To Bass Boost Press @/ #to turnPress %/ Þto move to Sound CONTROL, then press @/ # @/ #Press %/ Þto move to SETTING, then press @/ # Press %/ Þ/ @/ #to adjust the tone as you wantPress % / Þto move to Surround LEVEL, then press @/ # Press %/ Þto move to Tone CONTROL, then press @/ #Storing the Preset Stations Also see Press %/ Þto move To Preset MEMORY, then press @/ #Preset Memory menu Appears Press %/ Þto move To Tuner CONTROL, then Press @/ #Remote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemSame time Automatic Source SelectionDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemDisc Search Only for CD Player Disc Title InputPress Text Display while CD or MD is selected as the source Showing the Disc Information on the TV ScreenTo exit from the Disc information screen Press %/ Þto move to SEARCH, then press on Screen SET Press Text Display while CD is selected as the sourcePress %/ Þto move to Performer Then press on Press on Screen SET againPress %/ Þto move To GENRE, then Press on Screen Press %/ Þto move To Search Then press onThen press on Screen SET Entering the Disc InformationEnter the disc title, referring to steps 3 Up to 32 charactersPress Text Display while MD is selected as the source For the MD recorderTuner Operating JVC’s Audio/Video ComponentsSound control section Amplifier CD playerCassette deck MD recorderDVD player Problem Possible Cause Solution TroubleshootingAmplifier SpecificationsFM tuner IHF AM tunerPrecaución para la línea de la red CA Precaução para a ligação à tensão da rede CA

RX-669P, RX-669PGD, LVT0142-006A specifications

JVC, a renowned name in the world of audio and visual technology, continues to impress with its range of high-quality products. Among these, the JVC LVT0142-006A, RX-669PGD, and RX-669P stand out for their remarkable features and performance.

The JVC LVT0142-006A is primarily recognized as a versatile speaker system designed to complement various home audio setups. This model boasts a sleek design that seamlessly fits into any environment, with a focus on delivering powerful sound. It integrates advanced audio technologies to ensure clarity and precision in output, making it suitable for music lovers and film enthusiasts alike. The speaker also supports a range of input options, allowing users to connect multiple devices effortlessly.

Moving on to the RX-669PGD, this receiver is packed with features tailored for optimal sound reproduction and comprehensive connectivity. It supports a variety of audio formats, ensuring that listeners can enjoy their favorite music in multiple ways. The RX-669PGD is equipped with an integrated amplifier that delivers robust power, providing an immersive listening experience. Its user-friendly interface allows for easy navigation, while the built-in Bluetooth capability enables wireless streaming from smartphones and tablets.

The RX-669P model takes the legacy of the RX-669PGD further by incorporating extensive compatibility options. It features multiple HDMI inputs and outputs, making it an excellent choice for home theater setups. This model supports 4K video passthrough, ensuring that users can enjoy high-resolution content without any loss in quality. With its surround sound capabilities, the RX-669P transforms any living space into a dynamic audio environment, significantly enhancing the viewing experience of movies and shows.

All three products embody JVC’s commitment to quality and innovation. They utilize cutting-edge materials in their construction, ensuring durability and longevity. Furthermore, the design philosophy behind these models emphasizes not only performance but also aesthetics, making them attractive additions to any home.

In summary, the JVC LVT0142-006A, RX-669PGD, and RX-669P are exemplary products that showcase JVC's dedication to delivering high-fidelity audio solutions. With their advanced features, versatile connectivity options, and sleek designs, they cater to the demands of modern consumers while enhancing the overall audio experience.
Top Page Image Contents