JVC RX-669PGD, LVT0142-006A manual Specifications, Amplifier, FM tuner IHF, AM tuner, General

Page 37

Specifications

Amplifier

Output Power

At Stereo operation: 100* watts per channel, min. RMS, driven into 8 ohms, at 1 kHz with no more than 0.9 % total harmonic distortion. (IEC268-3/DIN)

At Surround operation:

Front Channels:

80* watts per channel, min. RMS, driven into

 

4 ohms at 1 kHz with no more than 0.8 % total

 

harmonic distortion.

Center channel:

80* watts, min. RMS, driven into 4 ohms at 1

 

kHz, with no more than 0.8 % total harmonic

 

distortion.

Rear channels:

80* watts per channel, min. RMS, driven into

 

4 ohms at 1 kHz, with no more than 0.8 %

 

total harmonic distortion.

 

(* Measured on AC 110V, 127V, 220V, and

 

240V)

Total Harmonic Distortion (8 ohms, 1 kHz): 0.8%** at 100 watts output

(** Measured by JVC Audio Analysis System, on AC 110V, 127V, 220V, and 240V)

Audio

Audio Input Sensitivity/Impedance (1 kHz): PHONO (MM): 2.7 mV/47 k ohms CD, TAPE/MD, TV SOUND, VCR, DVD:

220 mV/47 k ohms

Audio Output Level: TAPE/MD, VCR 220 mV

Signal-to-Noise Ratio (’66 IHF/DIN):

PHONO:70 dB/66 dB

CD, TAPE/MD, TV SOUND, VCR, DVD: 87 dB/67 dB

Frequency Response (8 ohms)

PHONO:20 Hz to 20 kHz (±1 dB) CD, TAPE/MD, TV SOUND, VCR, DVD:

20 Hz to 20 kHz (±1 dB)

RIAA Phono Equalization: ±1 dB (20 Hz to 20 kHz)

Video

Video Input Sensitivity/Impedance:

Composite video:

VCR, DVD:

 

1 Vp-p/75 ohms

S-video: DVD

(Y: luminance): 1 Vp-p/75 ohms

 

(C: chrominance, burst): 0.286 Vp-p/75 ohms

Video Output Level:

Composite video: VCR, MONITOR OUT 1 Vp-p/75 ohms

S-video: MONITOR OUT

(Y: luminance): 1 Vp-p/75 ohms

(C: chrominance, burst): 0.286 Vp-p/75 ohms

Synchronization:Negative

Signal-to-Noise Ratio:

45 dB

On-Screen Color System: PAL

FM tuner (IHF)

Tuning Range:

87.50 MHz to 108.00 MHz

Usable Sensitivity: Monaural: 17.0 dBf (1.95 µV/75 ohms)

50 dB Quieting Sensitivity

Monaural

21.3 dBf (3.2 µV/75 ohms)

Stereo

41.3 dBf (31.5 µV/75 ohms)

Signal-to-Noise Ratio (IHF-A weighted)

Monaural

78 dB at 85 dBf

Stereo

73 dB at 85 dBf

Total Harmonic Distortion:

Monaural

0.4 % at 1 kHz

Stereo

0.6 % at 1 kHz

Stereo Separation at REC OUT: 35 dB at 1 kHz

Alternate Channel Selectivity:

60 dB: (±400 kHz)

Frequency Response: 30 Hz to 15 kHz: (+0.5 dB, –3 dB)

AM tuner

 

 

 

Tuning Range:

531 kHz to 1,602 kHz (at 9 kHz interval)

 

530 kHz to 1,600 kHz (at 10 kHz interval)

Usable Sensitivity: Loop antenna

400 µV/m

Signal-to-Noise Ratio

 

50 dB (100 mV/m)

General

 

 

 

Power Requirements:

AC 110V/127V/220V/230-240V ,

 

 

Adjustable with the voltage selector, 50/

 

 

60 Hz

 

Power Consumption:

250 watts (at operation)

 

 

5 watts (in standby mode)

Dimensions (W x H x D):

435 x 146 x 403.5 mm

 

 

(17 3/16 x 5 3/4 x 15 15/16 inches)

Mass:

 

10.2 kg (22.5 lbs)

Designs & specifications are subject to change without notice.

English

34

Page 36 Page 38
Image 37
Page 36 Page 38
Contents RX-669PGD Precaución English Table of Contents Parts Identification Front Panel Remote ControlTo use the Cursor control buttons q on the front panel Checking the Supplied Accessories Before Installation Connecting the FM and AM AntennasSetting the Voltage Selector Switch Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers Connecting the rear and center speakersConnecting the subwoofer speaker Connecting Audio/Video ComponentsAudio component connections TV as the monitor Video component connectionsPutting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet Replace the coverFrom the remote control Turning the Power On and Off StandbyBasic Operations On the front panelMuting the Sound Selecting the Front SpeakersRecording a Source Adjusting the Front Speaker Output Balance Attenuating the Input SignalAdjusting the Tone Reinforcing the BassSetting Center and Rear Speakers for DSP Modes Basic SettingsPress Setting so that the cursor Changing the Source NameAdjust the sound using the functions listed above Using the Sleep TimerPress ONE Touch Operation Tuning in Stations Manually Setting the AM Tuner Interval Spacing Using Preset TuningReceiving Radio Broadcasts To tune in a preset station Press 10 keys to select a preset channel numberWhen an FM stereo broadcast is hard to receive or noisy Press FM/AM3D-PHONIC modes Using the DSP ModesSurround Modes Dolby SurroundSpeaker arrangements Available DSP modes Available DSP Modes According to the Speaker ArrangementAdjusting DAP Digital Acoustic Processor Modes Adjusting the 3D-PHONIC ModesUntil the mode PRO Logic Or Theater appears on Display Press Rearl / + to adjust the rear speaker output levelPress Test to check the speaker Output balanceTo cancel the DSP mode Press Surround repeatedly Until the DSP mode you wantActivating the DSP Modes Select and play a sound sourceActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModeUsing the On-Screen Menus Press any one of %/ Þ / @/ # Press % / Þto move To Bass Boost Press @/ #to turnPress %/ Þto move to Sound CONTROL, then press @/ # @/ #Press %/ Þto move to SETTING, then press @/ # Press %/ Þ/ @/ #to adjust the tone as you wantPress % / Þto move to Surround LEVEL, then press @/ # Press %/ Þto move to Tone CONTROL, then press @/ #Storing the Preset Stations Also see Press %/ Þto move To Preset MEMORY, then press @/ #Preset Memory menu Appears Press %/ Þto move To Tuner CONTROL, then Press @/ #Remote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemSame time Automatic Source SelectionDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemDisc Search Only for CD Player Disc Title InputShowing the Disc Information on the TV Screen Press Text Display while CD or MD is selected as the sourceTo exit from the Disc information screen Press %/ Þto move to SEARCH, then press on Screen SET Press Text Display while CD is selected as the sourcePress %/ Þto move to Performer Then press on Press on Screen SET againPress %/ Þto move To GENRE, then Press on Screen Press %/ Þto move To Search Then press onThen press on Screen SET Entering the Disc InformationEnter the disc title, referring to steps 3 Up to 32 charactersPress Text Display while MD is selected as the source For the MD recorderTuner Operating JVC’s Audio/Video ComponentsSound control section Amplifier CD playerMD recorder Cassette deckDVD player Problem Possible Cause Solution TroubleshootingAmplifier SpecificationsFM tuner IHF AM tunerPrecaución para la línea de la red CA Precaução para a ligação à tensão da rede CA

RX-669P, RX-669PGD, LVT0142-006A specifications

JVC, a renowned name in the world of audio and visual technology, continues to impress with its range of high-quality products. Among these, the JVC LVT0142-006A, RX-669PGD, and RX-669P stand out for their remarkable features and performance.

The JVC LVT0142-006A is primarily recognized as a versatile speaker system designed to complement various home audio setups. This model boasts a sleek design that seamlessly fits into any environment, with a focus on delivering powerful sound. It integrates advanced audio technologies to ensure clarity and precision in output, making it suitable for music lovers and film enthusiasts alike. The speaker also supports a range of input options, allowing users to connect multiple devices effortlessly.

Moving on to the RX-669PGD, this receiver is packed with features tailored for optimal sound reproduction and comprehensive connectivity. It supports a variety of audio formats, ensuring that listeners can enjoy their favorite music in multiple ways. The RX-669PGD is equipped with an integrated amplifier that delivers robust power, providing an immersive listening experience. Its user-friendly interface allows for easy navigation, while the built-in Bluetooth capability enables wireless streaming from smartphones and tablets.

The RX-669P model takes the legacy of the RX-669PGD further by incorporating extensive compatibility options. It features multiple HDMI inputs and outputs, making it an excellent choice for home theater setups. This model supports 4K video passthrough, ensuring that users can enjoy high-resolution content without any loss in quality. With its surround sound capabilities, the RX-669P transforms any living space into a dynamic audio environment, significantly enhancing the viewing experience of movies and shows.

All three products embody JVC’s commitment to quality and innovation. They utilize cutting-edge materials in their construction, ensuring durability and longevity. Furthermore, the design philosophy behind these models emphasizes not only performance but also aesthetics, making them attractive additions to any home.

In summary, the JVC LVT0142-006A, RX-669PGD, and RX-669P are exemplary products that showcase JVC's dedication to delivering high-fidelity audio solutions. With their advanced features, versatile connectivity options, and sleek designs, they cater to the demands of modern consumers while enhancing the overall audio experience.
Top Page Image Contents