JVC RX-669PGD, LVT0142-006A manual Receiving Radio Broadcasts, Tuning in Stations Manually

Page 16

English

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

Setting the AM Tuner Interval Spacing

Using Preset Tuning

 

Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing. When shipped, the spacing is set to 9 kHz.

On the front panel ONLY:

To select the 10 kHz interval:

Be sure the receiver is tuned off, but is plugged into an AC outlet .

Hold down cursor control % and press STANDBY/ON . Now the 10 kHz interval is selected.

STANDBY

/I

STANDBY/ON

Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 30 FM and 15 AM stations.

To store the preset stations

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel ONLY:

1. Tune in the station you want to preset (see left).

If you want to store the FM reception mode for this station, select the FM reception mode you want. See “Selecting the FM Reception Mode.”

To change back to the 9 kHz interval:

Be sure the receiver is tuned off, but plugged into an AC outlet. Hold

2. Press MEMORY.

CH–

MEMORY

down cursor control Þand press STANDBY/ON . Now the 9 kHz interval is selected.

Tuning in Stations Manually

On the front panel ONLY:

FM/AM

1. Press FM/AM to select the band.

The cursor control %/ Þ / @/ #buttons can be now used for operating the tuner.

•Each time you press the button, the band alternates between FM and AM.

2. Press cursor control % / Þ repeatedly until “ – TUNING +” appears on the display.

3.Press cursor control @/ #until you find the frequency you want.

•Pressing @decreases the frequency.

•Pressing #increases the frequency.

Notes:

•When you hold cursor control @ / # in step 3, the frequency keeps changing until a station is tuned in.

•When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.

When an FM stereo program is received, the STEREO indicator also lights up.

VOLUME

100 1k 10k

“CH-” appears and the channel number position starts flashing on the display for about 5 seconds.

3. Press cursor control @/ #to select a channel number while the channel number position is flashing.

Note:

You can use the 10 keys on the remote control to select the preset number. When using the 10 keys, be sure that they are activated for the tuner, not for the CD and others. (See page 31.)

4. Press MEMORY again while the

MEMORY

selected channel number is

 

flashing on the display.

 

The selected channel number stops flashing.

The station is assigned to the selected channel number.

To store other stations into other channel numbers

Once you have preset a station, the cursor control @/ #buttons work for selecting preset channels. To tuner in another station to preset, press cursor control %/ Þrepeatedly until “– TUNING +” appears on the display, then repeat steps 1 to 4 above.

To erase a stored preset station

Storing a new station on a used number erases the previously stored one.

13

Page 15 Page 17
Image 16
Page 15 Page 17
Contents RX-669PGD Precaución English Table of Contents Parts Identification Front Panel Remote ControlTo use the Cursor control buttons q on the front panel Before Installation Connecting the FM and AM Antennas Checking the Supplied AccessoriesSetting the Voltage Selector Switch Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers Connecting the rear and center speakersConnecting the subwoofer speaker Connecting Audio/Video ComponentsAudio component connections Video component connections TV as the monitorConnecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet Replace the coverTurning the Power On and Off Standby From the remote controlBasic Operations On the front panelMuting the Sound Selecting the Front SpeakersRecording a Source Attenuating the Input Signal Adjusting the Front Speaker Output BalanceAdjusting the Tone Reinforcing the BassBasic Settings Setting Center and Rear Speakers for DSP ModesPress Setting so that the cursor Changing the Source NameAdjust the sound using the functions listed above Using the Sleep TimerPress ONE Touch Operation Tuning in Stations Manually Setting the AM Tuner Interval Spacing Using Preset TuningReceiving Radio Broadcasts Press 10 keys to select a preset channel number To tune in a preset stationWhen an FM stereo broadcast is hard to receive or noisy Press FM/AMUsing the DSP Modes 3D-PHONIC modesSurround Modes Dolby SurroundAvailable DSP Modes According to the Speaker Arrangement Speaker arrangements Available DSP modesAdjusting the 3D-PHONIC Modes Adjusting DAP Digital Acoustic Processor ModesPress Rearl / + to adjust the rear speaker output level Until the mode PRO Logic Or Theater appears on DisplayPress Test to check the speaker Output balancePress Surround repeatedly Until the DSP mode you want To cancel the DSP modeActivating the DSP Modes Select and play a sound sourceUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeUsing the On-Screen Menus Press % / Þto move To Bass Boost Press @/ #to turn Press any one of %/ Þ / @/ #Press %/ Þto move to Sound CONTROL, then press @/ # @/ #Press %/ Þ/ @/ #to adjust the tone as you want Press %/ Þto move to SETTING, then press @/ #Press % / Þto move to Surround LEVEL, then press @/ # Press %/ Þto move to Tone CONTROL, then press @/ #Press %/ Þto move To Preset MEMORY, then press @/ # Storing the Preset Stations Also seePreset Memory menu Appears Press %/ Þto move To Tuner CONTROL, then Press @/ #Compu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverSame time Automatic Source SelectionText Compu Link Remote Control System Displaying the Disc Information on the TV screenDisc Search Only for CD Player Disc Title InputShowing the Disc Information on the TV Screen Press Text Display while CD or MD is selected as the sourceTo exit from the Disc information screen Press Text Display while CD is selected as the source Press %/ Þto move to SEARCH, then press on Screen SETPress %/ Þto move to Performer Then press on Press on Screen SET againPress %/ Þto move To Search Then press on Press %/ Þto move To GENRE, then Press on ScreenThen press on Screen SET Entering the Disc InformationUp to 32 characters Enter the disc title, referring to steps 3Press Text Display while MD is selected as the source For the MD recorderOperating JVC’s Audio/Video Components TunerSound control section Amplifier CD playerMD recorder Cassette deckDVD player Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierFM tuner IHF AM tunerPrecaução para a ligação à tensão da rede CA Precaución para la línea de la red CA

RX-669P, RX-669PGD, LVT0142-006A specifications

JVC, a renowned name in the world of audio and visual technology, continues to impress with its range of high-quality products. Among these, the JVC LVT0142-006A, RX-669PGD, and RX-669P stand out for their remarkable features and performance.

The JVC LVT0142-006A is primarily recognized as a versatile speaker system designed to complement various home audio setups. This model boasts a sleek design that seamlessly fits into any environment, with a focus on delivering powerful sound. It integrates advanced audio technologies to ensure clarity and precision in output, making it suitable for music lovers and film enthusiasts alike. The speaker also supports a range of input options, allowing users to connect multiple devices effortlessly.

Moving on to the RX-669PGD, this receiver is packed with features tailored for optimal sound reproduction and comprehensive connectivity. It supports a variety of audio formats, ensuring that listeners can enjoy their favorite music in multiple ways. The RX-669PGD is equipped with an integrated amplifier that delivers robust power, providing an immersive listening experience. Its user-friendly interface allows for easy navigation, while the built-in Bluetooth capability enables wireless streaming from smartphones and tablets.

The RX-669P model takes the legacy of the RX-669PGD further by incorporating extensive compatibility options. It features multiple HDMI inputs and outputs, making it an excellent choice for home theater setups. This model supports 4K video passthrough, ensuring that users can enjoy high-resolution content without any loss in quality. With its surround sound capabilities, the RX-669P transforms any living space into a dynamic audio environment, significantly enhancing the viewing experience of movies and shows.

All three products embody JVC’s commitment to quality and innovation. They utilize cutting-edge materials in their construction, ensuring durability and longevity. Furthermore, the design philosophy behind these models emphasizes not only performance but also aesthetics, making them attractive additions to any home.

In summary, the JVC LVT0142-006A, RX-669PGD, and RX-669P are exemplary products that showcase JVC's dedication to delivering high-fidelity audio solutions. With their advanced features, versatile connectivity options, and sleek designs, they cater to the demands of modern consumers while enhancing the overall audio experience.
Top Page Image Contents