Precor C764i manual Connector

Page 6

Cardio Theater Integrated Bracket Assembly Instructions

1.Remove the bracket cover.

Loosen the bolts on the pivot tube using a ⁷⁄₃₂-inch hex key. Pull the bracket cover away from the assembly. Set it aside.

2.Feed the coaxial/power cable with its three connectors through the bracket assembly. Set the bracket assembly aside.

Important: Make sure you feed the cable so the end with the three connectors appears out of the top of the bracket assembly.

1
Bracket
cover
Bracket
assembly
	Bracket
	assembly
Bracket cover
2
	Top of
	bracket
	assembly
Coaxial/power
cable with its
connectors
Power
connector
DVD connector
(optional accessory)	Coaxial
	Coaxial
	connector

Install the Bracket Assembly

page 6

Image 6

Contents C764i Integrated LCD Screen Option Table of Contents Obtaining Service Unpacking the Equipment Before You BeginPreparations RequiredTools3Install the Bracket Assembly Install the Bracket AssemblyConnector Remove three Bracket assembly Feed the Cable through the Base 4FeedthroughthetheCableBaseReplace the side cover 5Attach the LCD Screen Attach the LCD ScreenImportant The screen spacer is used only for DVD Reinstall the Bracket Cover 7Connect the Controller and the Cables Connect the Controller and the Cables