Precor C764i manual Feed the Cable through the Base, 4FeedthroughthetheCableBase

Page 9

Cardio Theater Integrated Bracket Assembly Instructions

4FeedthroughthetheCableBase

1.Use a Phillips-head screwdriver to remove the 16 screws that hold the side covers on the unit. Set the screws aside.

2.Slide both side covers up and away from the base of the unit.

3.Feed the coaxial/power cable and its connectors into the internal upright frame tube that does not contain the ribbon cable.

4.Pull the cable and both connectors out from the base of the tube and attach the power extension cable to the power connector.

1

2

 

3

4

 

 

Power connector

Power

 

 

extension

 

 

cable

Feed the Cable through the Base

page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents C764i Integrated LCD Screen Option Table of Contents Before You Begin Obtaining Service Unpacking the EquipmentRequiredTools PreparationsInstall the Bracket Assembly 3Install the Bracket AssemblyConnector Remove three Bracket assembly 4FeedthroughthetheCableBase Feed the Cable through the BaseReplace the side cover Attach the LCD Screen 5Attach the LCD ScreenImportant The screen spacer is used only for DVD Reinstall the Bracket Cover Connect the Controller and the Cables 7Connect the Controller and the Cables
Top Page Image Contents