Cardio Theater Integrated Bracket Assembly Instructions
7Connect the Controller and the Cables
Note: Retrieve the rubber adapter mounts from the bracket assembly package. Retrieve the controller from the LCD Screen package.
1.Connect the controller cable to the controller.
A definite click is heard when the connector snaps into place inside its receptacle.
2.Place the rubber adapter mounts around the center of the bracket bar.
3.Secure the controller.
Use two tie wraps to secure the controller to the rubber adapter mounts and bracket bar.
4.At the base of the climber, plug the power and coaxial connectors on the coaxial/power cable into the strip designed for Cardio Theater use.
Note: For more information, refer to the Cardio Theater LCD Screen manual.
| Controller | Bracket bar |
|
| |
|
| Rubber adapter |
|
| mounts |
Controller cable |
| |
1 |
| 2 |
LCD screen | 3 |
|
Controller |
|
|
Tie wraps |
|
|
Controller cable |
|
|
Connect the Controller and the Cables
page 15