STEP 3
A.) NOTE: Extra help may be needed to hold the Front Post (#4) while connecting the cables and wires.
B.) Remove the four M8 x ¾” Allen Bolts (#15) and four Ø ¾” Curved Washers (#16)
C.) Attach the Front Post (#9) to the Main Frame (#26). Connect the Middle Computer Wire (#4) from the bottom of the Front Post to the Lower Computer Wire (#22) from the Main Frame.
D.) Pull the tension connector from the Upper Tension Cable (#17) and slide in between the opening on the connector on the Lower Tension Cable (#23). Pull the Upper Tension Cable upward and slide the wire through the slot on the bracket.
E.) Drop down the Upper Tension Cable so the fitting sits firmly on top of the bracket.
F.) Secure the Front Post to the Main Frame with the four M8 x ¾” Allen Bolts (#15) and four Ø ¾” Curved Washers (#16).
© IMPEX INC. | 8 |