R O U T I N E M A I N T E N A N C E
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our bikes so lubrication is not needed. The most important maintenance step is to simply wipe your perspiration off the bike
after each use.
HOW DO I CLEAN MY HORIZON FITNESS UPRIGHT BIKE?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your Horizon Fitness upright bike and its operating environment will keep maintenance problems and service calls to a minimum. For this reason, Horizon Fitness recommends that the following preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
Turn off the upright bike with the on/off switch, and unplug the power cord from the wall outlet.
WARNING!
To remove power from the upright bike, the power cord must be disconnected from the wall outlet. (Bsc3 only)
•Wipe down the upright bike with a damp cloth. Never use solvents, as they can cause damage to the upright bike.
•Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
•Make sure the power cord is not underneath the upright bike or in any other area where it can become pinched or cut.
•Check the tension and alignment of the upright bike. Make sure that the upright bike belt will not damage any other components on the bike by being misaligned.
EVERY WEEK
Clean underneath the upright bike, following these steps:
•Turn off the upright bike with the on/off switch.
•Then unplug the power cord at the wall outlet. (Bsc3 only)
•Move the upright bike to a remote location.
•Wipe or vacuum any dust particles or other objects that may have accumulated underneath the upright bike.
•Return the upright bike to its previous position.
EVERY MONTH
•Inspect all assembly bolts and pedals on the machine for proper tightness.
S.Class Series | 26 |