Perreaux CD Player owner manual Serial Number

Page 11

Serial Number

Caution!

Caution!

Caution!

The pin assignments of the balanced XLR output connectors are as follows:

Pin 1: Signal ground

Pin 2: Signal + (non-inverting)

Pin 3: Signal – (inverting)

Shield ground: Chassis ground

Please refer to the operating manual of your preamplifier; integrated amplifier or receiver to verify that the pin assignments of the input connectors correspond to the CD1 balanced outputs. In the event that they are not compatible, the interconnecting cable will need to be altered to suit.

Serial Number

The serial number is unique to your CD1. Please record this number and store it in a safe place. For any service related enquiry, please be prepared to quote the product serial number to Perreaux personnel or their service representative.

Input Voltage and Fuse Rating

Input Voltage

It is important that the CD1 be operated from the correct AC mains voltage. This unit is factory set for the voltage applicable to the original country of destination.

The CD1 will operate satisfactorily within a voltage variation of up to ±5% of that voltage at which the unit has been set.

If you require the voltage setting to be altered, e.g. relocation to another area, city or country, or extraordinarily high or low voltages, please contact your Perreaux dealer. Qualified service personnel can only perform this modification.

Never attempt to connect the unit to the incorrect voltage. Severe damage can result from applying incorrect voltage to the unit.

Fuse Rating

The fuse rating displayed here, refers to the rating of the mains inlet fuse.

For more information on fuse ratings, please refer to Chapter 13 “Specifications”.

Never replace the fuses with any other ratings other than the one specified.

11

Image 11

Contents Compact Disc Player Prisma CD1Perreaux Industries Limited makes no warranty for the use of its products, other than those expressly contained in the warranty detailed herein. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change products or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Perreaux are granted by the Company in connection with the sale of Perreaux products, expressly or by implication Introducing the Perreaux CD1 Compact Disc Player ii Important Safety Instructions i ii iii 1 2 3 4 5 6 7 8 9 10 Table of Contents1 Unpacking and Placement Instant Install ‘O/C’ Button Front Panel FunctionsVacuum Fluorescent Display ‘RPT’ Button‘’ Button HDCD Indicator‘STBY’ Button IR SensorBalanced Analog Output Rear Panel FunctionsDigital Output Unbalanced Analog OutputSerial Number AC Mains Input and Fuse AC Mains Input 5 Remote Control Functions Pause Direct AccessTrack Forward / Track Backward PlayREPEAT 1 REPEAT ALL CANCEL 6 Special Design Philosophies John Pawson writes Special Design Features Rugged Build Quality Multiple Regulated PowerSupplies Burr Brown DAC Balanced Analog Output Positioning Ancillary Equipment Final Thoughts 8Maximising System PotentialInterconnects and Speaker Cables Never apply liquid directly to the CD1 Care and MaintenanceRegular Cleaning Cover Front Paneland Obtaining Service Warranty Information3 Year Extended Warranty Form Extended WarrantyRegistration Form Earth Loops 12 Faultfinding Your SystemCause and Elimination of Hum Induced HumSOURCE AMPLIFIER Identifying and Isolating ProblemsBroken Earth Connections Initial system connectionsSOURCE AMPLIFIER B Step 1 - LoudspeakersStep 2 - Loudspeaker Leads Step 3a - Inputs ChannelsStep 3b - Inputs Interconnects Faultfinding Flowchart 13Specifications Total Harmonic Distortion THD+N 430mm 16.9”105dB Signal to Noise RatioIntermodulation Distortion 0.004% @ 1kHzPhysical Dimensions New Zealand Ph +64 3 489 Fax +64 Contact DetailsInstallation Notes