Perreaux CD Player owner manual AC Mains Input and Fuse AC Mains Input

Page 12

AC Mains Input and Fuse

Caution!

Caution!

AC Mains Input and Fuse

AC Mains Input

An IEC-standard mains input is provided at the rear of the unit. The AC cord set is removable, allowing you to upgrade to a cord set of your preference.

Prior to connection to the AC mains, please check the voltage label on the rear panel to ensure that your unit conforms to the power supply in your area. Never attempt to connect the unit to the incorrect voltage. Severe damage can result from applying incorrect voltage to the unit.

Mains Fuse

The CD1 is equipped with a user serviceable AC mains fuse. In the event of fuse failure, always replace with the same type and value fuse. Remember, fuses do not usually blow without a reason. Any doubts about fuse failure should be conveyed directly to your Perreaux dealer.

For more information on fuse ratings, please refer to Chapter 13 “Specifications”.

This is the ONLY user accessible fuse.

Never replace the fuses with any other ratings other than the one specified on the rear panel.

Always ensure your CD1 is disconnected from the mains supply before attempting to change the mains fuse.

Power Switch

Depress this switch to the right (I) to turn power ON. Depress this switch to the left (O) to turn the CD1 off at which time the outputs will be disconnected.

12

Image 12

Contents Prisma CD1 Compact Disc PlayerPerreaux Industries Limited makes no warranty for the use of its products, other than those expressly contained in the warranty detailed herein. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change products or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Perreaux are granted by the Company in connection with the sale of Perreaux products, expressly or by implication Introducing the Perreaux CD1 Compact Disc Player ii Important Safety Instructions Table of Contents i ii iii 1 2 3 4 5 6 7 8 9 101 Unpacking and Placement Instant Install Front Panel Functions Vacuum Fluorescent Display‘RPT’ Button ‘O/C’ ButtonHDCD Indicator ‘STBY’ ButtonIR Sensor ‘’ ButtonRear Panel Functions Digital OutputUnbalanced Analog Output Balanced Analog OutputSerial Number AC Mains Input and Fuse AC Mains Input 5 Remote Control Functions Direct Access Track Forward / Track BackwardPlay PauseREPEAT 1 REPEAT ALL CANCEL 6 Special Design Philosophies John Pawson writes Rugged Build Quality Multiple Regulated Power Supplies Burr Brown DAC Balanced Analog OutputSpecial Design Features 8Maximising System Potential Interconnects and Speaker CablesPositioning Ancillary Equipment Final Thoughts Care and Maintenance Regular CleaningCover Front Panel Never apply liquid directly to the CD1Warranty Information and Obtaining ServiceExtended Warranty Registration Form3 Year Extended Warranty Form 12 Faultfinding Your System Cause and Elimination of HumInduced Hum Earth LoopsIdentifying and Isolating Problems Broken Earth ConnectionsInitial system connections SOURCE AMPLIFIERStep 1 - Loudspeakers Step 2 - Loudspeaker LeadsStep 3a - Inputs Channels SOURCE AMPLIFIER BStep 3b - Inputs Interconnects Faultfinding Flowchart 13Specifications 430mm 16.9” Total Harmonic Distortion THD+NSignal to Noise Ratio Intermodulation Distortion0.004% @ 1kHz 105dBPhysical Dimensions Contact Details New Zealand Ph +64 3 489 Fax +64Installation Notes