Perreaux CD Player owner manual 430mm 16.9”, Total Harmonic Distortion THD+N

Page 29

430mm (16.9”)

Specifications

Explained

Mains Input Voltage

100V, 110V, 120V, 220V, 230V or 240V AC at 50Hz or 60Hz

(Set within the CD1 at time of manufacture)

Dimensions
Width	430mm (16.9”)
Height	106mm (4.2”)
Depth	323mm (12.7”)
Fuse Ratings
Mains input fuse
100 – 125V:	2SB slow blow 0.5A
200 – 250V:	2SB slow blow 0.5A
	(user serviceable)
Weight
Net:	7.8kg (17.2lb)
	(CD player only)
Gross:	10.8kg (23.8lb)
	(CD player, accessories and packing material)
Rated Output	2.0VRMS

This is the reference output level to which other specifications, such as signal to noise ratio and total harmonic distortion, are referred.

Digital Output

0.5Vp-p

Indicates the peak-to-peak voltage of the signal from the digital output.

Output Impedance

100Ω

Output Impedance indicates the ability of the unit to drive the Line Level Output. The low impedance of the CD1 means that it will drive any combination of cable configuration (length, capacitance, etc.) and component impedance with ease whilst maintaining signal integrity.

Digital Load Impedance

75Ω

Specifies the load impedance required for the coaxial digital interconnect.

Frequency Response

20Hz to 20kHz, ±0.5dB

Describes the frequency range where the amplitude or strength of the output signal deviates from the source material by no more than 0.5dB

Total Harmonic Distortion (THD+N)

0.004% @ 1kHz

Total Harmonic Distortion + Noise is the percentage of output signal which is made up of frequencies added due to harmonics of the fundamental frequency and noise.

29

Image 29

Contents Compact Disc Player Prisma CD1Perreaux Industries Limited makes no warranty for the use of its products, other than those expressly contained in the warranty detailed herein. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change products or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Perreaux are granted by the Company in connection with the sale of Perreaux products, expressly or by implication Introducing the Perreaux CD1 Compact Disc Player ii Important Safety Instructions i ii iii 1 2 3 4 5 6 7 8 9 10 Table of Contents1 Unpacking and Placement Instant Install Vacuum Fluorescent Display Front Panel Functions‘RPT’ Button ‘O/C’ Button‘STBY’ Button HDCD IndicatorIR Sensor ‘’ ButtonDigital Output Rear Panel FunctionsUnbalanced Analog Output Balanced Analog OutputSerial Number AC Mains Input and Fuse AC Mains Input 5 Remote Control Functions Track Forward / Track Backward Direct AccessPlay PauseREPEAT 1 REPEAT ALL CANCEL 6 Special Design Philosophies John Pawson writes Special Design Features Rugged Build Quality Multiple Regulated PowerSupplies Burr Brown DAC Balanced Analog Output Positioning Ancillary Equipment Final Thoughts 8Maximising System PotentialInterconnects and Speaker Cables Regular Cleaning Care and MaintenanceCover Front Panel Never apply liquid directly to the CD1and Obtaining Service Warranty Information3 Year Extended Warranty Form Extended WarrantyRegistration Form Cause and Elimination of Hum 12 Faultfinding Your SystemInduced Hum Earth LoopsBroken Earth Connections Identifying and Isolating ProblemsInitial system connections SOURCE AMPLIFIERStep 2 - Loudspeaker Leads Step 1 - LoudspeakersStep 3a - Inputs Channels SOURCE AMPLIFIER BStep 3b - Inputs Interconnects Faultfinding Flowchart 13Specifications Total Harmonic Distortion THD+N 430mm 16.9”Intermodulation Distortion Signal to Noise Ratio0.004% @ 1kHz 105dBPhysical Dimensions New Zealand Ph +64 3 489 Fax +64 Contact DetailsInstallation Notes