Perreaux CD Player owner manual 13Specifications

Page 28

13Specifications

13Specifications

Specifications In Brief

The CD1 specifications are detailed in brief and then subsequently in more detail. In the detailed version, we attempt to explain the significance of each specification.

The correlation between published specifications and sonic quality can be unreliable. A list of numbers reveals virtually nothing. All technical measurements must be subject to qualitative as well as quantitative interpretation. Measurements of the CD1 reveal excellent results by any standards. Tested at 115V and 230V after a 10 minute warm up period.

Audio Section
Rated Output
Unbalanced:	2.0VRMS
Balanced:	±2.0VRMS
Digital:	0.5Vp-p
Output Impedance
Unbalanced:	100E
Balanced:	350E
Digital Output Load Impedance:	75E
Frequency Response:	20Hz to 20kHz, ±0.5dB
Total Harmonic Distortion (THD+N)
Rated Output:	0.004% @ 1kHz
Intermodulation Distortion
Rated Output:	0.004% @ 1kHz
Signal to Noise Ratio
Rated Output:	>105dB
Dynamic Range:	>100dB
Channel Separation:	>110dB @ 1kHz
Channel Balance:	±0.5dB
Phase Linearity:	±0.5°
Digital to Analog Converters:	Dual 20-bit
Digital Filter:	8x oversampling
Power Consumption:	35W
Audio Connections
Audio Outputs
Analog
Unbalanced:	1 pair RCA line level
Balanced:	1 pair XLR line level
Digital:	75E coax RCA
Other Connections
1 x IEC AC mains input receptacle

28

Image 28

Contents Prisma CD1 Compact Disc PlayerPerreaux Industries Limited makes no warranty for the use of its products, other than those expressly contained in the warranty detailed herein. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change products or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Perreaux are granted by the Company in connection with the sale of Perreaux products, expressly or by implication Introducing the Perreaux CD1 Compact Disc Player ii Important Safety Instructions Table of Contents i ii iii 1 2 3 4 5 6 7 8 9 101 Unpacking and Placement Instant Install Front Panel Functions Vacuum Fluorescent Display‘RPT’ Button ‘O/C’ ButtonHDCD Indicator ‘STBY’ ButtonIR Sensor ‘’ ButtonRear Panel Functions Digital OutputUnbalanced Analog Output Balanced Analog OutputSerial Number AC Mains Input and Fuse AC Mains Input 5 Remote Control Functions Direct Access Track Forward / Track BackwardPlay PauseREPEAT 1 REPEAT ALL CANCEL 6 Special Design Philosophies John Pawson writes Supplies Burr Brown DAC Balanced Analog Output Rugged Build Quality Multiple Regulated PowerSpecial Design Features Interconnects and Speaker Cables 8Maximising System PotentialPositioning Ancillary Equipment Final Thoughts Care and Maintenance Regular CleaningCover Front Panel Never apply liquid directly to the CD1Warranty Information and Obtaining ServiceRegistration Form Extended Warranty3 Year Extended Warranty Form 12 Faultfinding Your System Cause and Elimination of HumInduced Hum Earth LoopsIdentifying and Isolating Problems Broken Earth ConnectionsInitial system connections SOURCE AMPLIFIERStep 1 - Loudspeakers Step 2 - Loudspeaker LeadsStep 3a - Inputs Channels SOURCE AMPLIFIER BStep 3b - Inputs Interconnects Faultfinding Flowchart 13Specifications 430mm 16.9” Total Harmonic Distortion THD+NSignal to Noise Ratio Intermodulation Distortion0.004% @ 1kHz 105dBPhysical Dimensions Contact Details New Zealand Ph +64 3 489 Fax +64Installation Notes