Perreaux CD Player owner manual Unpacking and Placement

Page 6

1 Unpacking and Placement

1 Unpacking and Placement

Unpacking Procedure

Note:

Note:

Box Contents

Placing Your CD1

The CD1 is packaged for maximum protection. Please carefully read the instructions below before proceeding to unpack the unit. Be extremely careful.

Inspect both ends of the cardboard box and open at the end without the central staple by slitting the reinforced tape at either side.

Fold back the flaps and tip the package on end and the inner box will slide out.

Lay the inner box down flat and upright, open it conventionally by separating the top tray from the bottom.

The product can now be removed from the bottom packaging. This will be easier if you have someone to help you by holding the base of the box.

Alternately, the bottom tray and player could be tipped upside down and the bottom packaging removed. If opened in this manner, please ensure that you turn the contents over again.

Be very careful to secure the unit if you are planning to flip the package upside down.

Remove the two white polystyrene protectors off either side of the player, leaving the black material covering.

Pull back the material and remove the protective black tissue from the front panel.

The player is now unpacked and ready for further installation.

Please retain all packaging material for future transport.

1 x CD1 Compact disc player

1 x CD1 Product manual

1x Perreaux remote control

2 x AAA batteries

1x Screwdriver

1x Detachable AC power cord

The CD1 should generally be placed close to your amplifier, keeping the interconnect cabling short.

6

Image 6

Contents Prisma CD1 Compact Disc PlayerPerreaux Industries Limited makes no warranty for the use of its products, other than those expressly contained in the warranty detailed herein. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change products or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Perreaux are granted by the Company in connection with the sale of Perreaux products, expressly or by implication Introducing the Perreaux CD1 Compact Disc Player ii Important Safety Instructions Table of Contents i ii iii 1 2 3 4 5 6 7 8 9 101 Unpacking and Placement Instant Install ‘RPT’ Button Front Panel FunctionsVacuum Fluorescent Display ‘O/C’ ButtonIR Sensor HDCD Indicator‘STBY’ Button ‘’ ButtonUnbalanced Analog Output Rear Panel FunctionsDigital Output Balanced Analog OutputSerial Number AC Mains Input and Fuse AC Mains Input 5 Remote Control Functions Play Direct AccessTrack Forward / Track Backward PauseREPEAT 1 REPEAT ALL CANCEL 6 Special Design Philosophies John Pawson writes Rugged Build Quality Multiple Regulated Power Supplies Burr Brown DAC Balanced Analog OutputSpecial Design Features 8Maximising System Potential Interconnects and Speaker CablesPositioning Ancillary Equipment Final Thoughts Cover Front Panel Care and MaintenanceRegular Cleaning Never apply liquid directly to the CD1Warranty Information and Obtaining ServiceExtended Warranty Registration Form3 Year Extended Warranty Form Induced Hum 12 Faultfinding Your SystemCause and Elimination of Hum Earth LoopsInitial system connections Identifying and Isolating ProblemsBroken Earth Connections SOURCE AMPLIFIERStep 3a - Inputs Channels Step 1 - LoudspeakersStep 2 - Loudspeaker Leads SOURCE AMPLIFIER BStep 3b - Inputs Interconnects Faultfinding Flowchart 13Specifications 430mm 16.9” Total Harmonic Distortion THD+N0.004% @ 1kHz Signal to Noise RatioIntermodulation Distortion 105dBPhysical Dimensions Contact Details New Zealand Ph +64 3 489 Fax +64Installation Notes