Huffy M0012 manual Reﬂector Brackets Installation, Installing Derailleur Guard on some models

Page 19

Reﬂector Brackets Installation

1.Position FRONT Reﬂector (7) so it points straight forward (ﬁg 10).

2. Tighten Clamp Screw.

	NOTE: Do not over-tighten. This will	7
	damage the Clamp.	7
	damage the Clamp.

Assembly

		fig 10
	1.	Position REAR Reﬂector (10) so it
		points straight backward (ﬁg 11).
10	2.	Tighten Clamp Screw.
10

	fig 11	NOTE: Do not over-tighten. This will
	fig 11	damage the Clamp.
		damage the Clamp.

Installing Derailleur Guard (on some models)

1.Remove Screws (11) from Frame Tabs (A).

2.Install Guard (12) using two Screws (11).

3.Make sure the Guard does not contact the Derailleur (B).

4.Tighten Screws (11) securely.

A

11

B

12

fig 12	19

Image 19

Contents For Mountain Bikes Your Bike Fitting the Rider to the Bicycle Your Bike Owner’s Bicycle Identiﬁcation RecordModel / Serial Number Purchase Date Model Name Use extra caution in wet weather Rules of the RoadMeanings of Warnings If you must ride at night or at time of poor visibilityYour Bike Owner’s Responsibility Parts Assembly View Parts View Parts List Parts Assembly ListDescription Assembly Introduction Flat-blade Screwdriver AssemblySmall Adjustable Wrench Tools NeededQuill Style Stem Handlebar and Stem InstallationThreadless Style Stem Install the Front Wheel Assemble the Front Wheel to the Fork AssemblyLoosen the Front Brakes Re-attach Front Brake Cable Re-attache Front Brake CableAssembly Setting Up the Handlebars To test the tightness of the stem Testing Stem and Handlebar TightnessTo test the tightness of the handlebar clamp Attach Seat to Seat Post pre-assembled on some models Assembly Seat InstallationTighten the quick release lever If the Seat Post 9 moves in the Seat Tube B Testing Seat Clamp and Post Clamp TightnessTo test the tightness of the seat clamp and the post clamp If the seat moves in the Seat Clamp a ﬁgTighten the pedals ﬁg Assembly Pedal InstallationInstalling Derailleur Guard on some models Reﬂector Brackets InstallationTest the tightness of each Brake Shoe Maintenance Brake SystemCenter brake shoes on rim Maintenance Final Brake Adjustment Before RidingStretching the cable ﬁg Check tightness of the cantilever mounting Bolt aPut the brake shoes the correct distance from the rim Maintenance Final Brake AdjustmentTest the tightness of the cable clamp ﬁg MaintenanceTest the travel of each brake lever Maintenance Parts of the Shift System Shift SystemOperation Operate the shift system as follows Maintenance Shift System These are the higher gear combinations Front Derailleur Adjustments Perform the Rear Derailleur Adjustments if Maintenance Rear Derailleur Adjustments Adjust the Index Shift System ﬁg Maintenance Maintenance Three-Piece Cranks various modelsSuspension Frame various models AdjustmentTo change the suspension Inﬂating the Tires Maintenance TiresMaintenance Lubrication Repair and ServiceLubrication Table What When HowCrank Bearings Maintenance ReﬂectorsInspection of the Bearings Head Tube BearingsWhat is not covered by this Limited Warranty? Warranty Huffy Corporation Limited WarrantyWhat does this Limited Warranty cover? What must you do to keep the Limited Warranty in effect?What will Huffy do? WarrantyFor how long does this Limited Warranty last? How do you get service?Always Wear Your Helmet When Riding this Product