Huffy M0012 manual Perform the Rear Derailleur Adjustments if

Page 29

Front Derailleur Adjustments

Put the “high” adjusting screw (E) in the correct position as follows:

•Shift the chain onto the largest front sprocket and the smallest rear sprocket.

•Turn the “high” adjusting screw (E) so the right inside edge of the chain cage and the chain just do not touch.

NOTE: If the shift lever does not move easily:

•If the shift cable seems to stick, lubricate it.

•Do not lubricate the shift control.

•If the shift cable is sharply bent, rusted or has broken strands, replace it.

Perform the “Rear Derailleur Adjustments” if:

•The chain will not shift onto all the rear sprockets.

•The chain comes off the rear sprockets.

•The chain makes noise while on the smallest or largest rear sprocket.

•The rear derailleur rubs the spoke protector.

Maintenance

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents For Mountain Bikes Your Bike Model / Serial Number Purchase Date Model Name Owner’s Bicycle Identification RecordFitting the Rider to the Bicycle Your Bike Meanings of Warnings Rules of the RoadIf you must ride at night or at time of poor visibility Use extra caution in wet weatherYour Bike Owner’s Responsibility Parts Assembly View Parts View Description Parts Assembly ListParts List Assembly Introduction Small Adjustable Wrench AssemblyTools Needed Flat-blade ScrewdriverQuill Style Stem Handlebar and Stem InstallationThreadless Style Stem Loosen the Front Brakes Assemble the Front Wheel to the Fork AssemblyInstall the Front Wheel Re-attach Front Brake Cable Re-attache Front Brake CableAssembly Setting Up the Handlebars To test the tightness of the handlebar clamp Testing Stem and Handlebar TightnessTo test the tightness of the stem Tighten the quick release lever Assembly Seat InstallationAttach Seat to Seat Post pre-assembled on some models To test the tightness of the seat clamp and the post clamp Testing Seat Clamp and Post Clamp TightnessIf the seat moves in the Seat Clamp a fig If the Seat Post 9 moves in the Seat Tube BTighten the pedals fig Assembly Pedal InstallationInstalling Derailleur Guard on some models Reflector Brackets InstallationTest the tightness of each Brake Shoe Maintenance Brake SystemStretching the cable fig Maintenance Final Brake Adjustment Before RidingCheck tightness of the cantilever mounting Bolt a Center brake shoes on rimPut the brake shoes the correct distance from the rim Maintenance Final Brake AdjustmentTest the travel of each brake lever MaintenanceTest the tightness of the cable clamp fig Maintenance Operation Operate the shift system as follows Shift SystemParts of the Shift System Maintenance Shift System These are the higher gear combinations Front Derailleur Adjustments Perform the Rear Derailleur Adjustments if Maintenance Rear Derailleur Adjustments Adjust the Index Shift System fig Maintenance Maintenance Three-Piece Cranks various modelsTo change the suspension AdjustmentSuspension Frame various models Inflating the Tires Maintenance TiresMaintenance Lubrication Repair and ServiceLubrication Table What When HowInspection of the Bearings Maintenance ReflectorsHead Tube Bearings Crank BearingsWhat does this Limited Warranty cover? Warranty Huffy Corporation Limited WarrantyWhat must you do to keep the Limited Warranty in effect? What is not covered by this Limited Warranty?For how long does this Limited Warranty last? WarrantyHow do you get service? What will Huffy do?Always Wear Your Helmet When Riding this Product
Top Page Image Contents