Rear Derailleur Adjustments
Put the “low” adjusting Screw in the correct position as follows:
•Shift the chain onto the largest rear Sprocket (F).
•Loosen Nut of the cable clamp.
•Turn the “low” adjusting Screw (H) so the Jockey Roller is exactly below the larg- est rear sprocket.
•Tighten the Nut of the cable clamp.
Adjust the Index Shift System (fig 23):
•Shift the chain onto the smallest rear sprocket.
•Without turning the crank, turn the Right Shift Control (A) one “click” rearward.
•Slowly turn the crank forward.
•The chain should move from the smallest rear sprocket to the next larger rear sprocket.
•Turn the Adjusting Barrel (B) OUT as needed so the chain moves exactly on to the second rear sprocket and does not rub, jump, or delay.
Maintenance
3 
2 
1 
1 2 3 4 5
6
B A
fig 23
When adjusted properly, the shift system will operate smoothly with no chain rubbing.
31