Front Reflector Bracket and Clear Reflector Assembly
This section covers the assembly of the front reflector to the front reflector bracket. Determine which style you have before beginning assembly.
Snap In Style | Screw In Style |
Reflector Assembly
1. Assemble the clear reflector to the front reflector bracket:
WARNING: Install the clear reflector exactly as shown or it will not operate correctly.
Snap In Style
-Push the reflector [1] onto the reflector bracket [2]
-Make sure the stud [3] on the reflector goes into the hole [4] of the bracket with a “snap” sound.
Screw In Style
-Put the reflector onto the reflector bracket
-Make sure the studs on the back of the reflector go into the holes of the reflector bracket
-Put the screw [?] through the bracket and into the reflector
-Tighten screw.